Products


Product Lines

Product Types

Product Applications

Markets

Clear All

Selected Filters:


  • A/D Firefilm III

    Features:

    • UL/ULC, ITS and ICC-ES Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
    • Advanced fiber free formulation - dust free surface.
    • Durable finish – Provides a hard, impact and abrasion resistant surface.
    • Topcoat finishes smooth to slight orange peel.
    • Thin film coating – space saving smaller column footprints.
    • Low VOC content.
    • LEED compliant

    Description:

    A/D Firefilm III is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes.


  • A/D Firefilm III C

    Features:

    • UL/ULC and ITS Listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative Finish – Gives a smooth, decorative finish. Compatible topcoats available in a wide range of colors.
    • Advanced fiber free formulation - dust free surface.
    • Durable finish – Provides a hard, impact and abrasion resistant surface.
    • Topcoat finishes smooth to slight orange peel.
    • Thin film coating – space saving smaller column footprints.
    • Low VOC content.
    • LEED compliant.
    • Extensive outgas testing for controlled cleanroom and sterile environments.

    Description:

    A/D Firefilm® III C is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes in clean room and sterile environments.


  • Additive 101

    Features:

    • Additive 101 accelerates polyurethane cure rates and shortens dry film formation time within a wide range of application temperatures. In general, dry times can be decreased from 25-40% depending on the ambient conditions and substrate temperature. With the use of Additive 101, select Carboline 133 & 134 series polyurethanes will continue to cure at temperatures as low as 20°F (-7°C). Refer to specific product cure times for guidance.

    Description:

    Additive 101 is an accelerator used to speed the cure of many solvent-based polyurethane coatings. It can be used in Carboline’s Carbothane Series finishes including the 133 and 134 Series products and Clear Coats. DO NOT USE with water-borne polyurethanes.


  • Additive 47

    Features:

    Description:

    Styrene


  • Additive 8505

    Features:

    • Additive 8505 accelerates atmospheric epoxy cure rates and shortens dry film formation time with a wide range of application temperatures. In general, dry times can be decreased from 25-40%, depending on the ambient conditions and substrate temperature. With the use of Additive 8505, select Carboguard products intended for atmospheric/non-immersion service will continue to cure at temperatures as low as 35 °F (2 °C); applicators shall be aware its use will also shorten pot life times by 40- 50%. Refer to product instructions and cure times for guidance.

    Description:

    Additive 8505 is an accelerator used to speed the cure of select atmospheric epoxies.


  • Additive 8506

    Features:

    Description:

    Epoxy accelerator


  • Additive 8509

    Features:

    Description:

    Urethane accelerator


  • Bitumastic 300 LH

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 16-24 mils (400-610 microns) in a single coat (up to 35 mils with force curing)
    • Compatible with controlled cathodic protection
    • Suitable for use in exposures as referenced in the following specifications*: Corp of Engineers C-200, C200a AWWA C-210 for exterior
    • SSPC-Paint 16

    Description:

    Bitumastic 300 LH is a “low-HAPS” version of the renowned high build coal tar epoxy (300M) used for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.


  • Bitumastic 300 M

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 16-24 mils (400-610 microns) in a single coat (up to 35 mils with force curing)
    • Compatible with controlled cathodic protection
    • Suitable for use in exposures as referenced in the following specifications:
    • Corp of Engineers C-200, C200a
    • AWWA C-210 for exterior
    • SSPC-Paint 16
    • Steel Tank Institute Corrosion Control System STI-P3
    • Approved MPI #35

    Description:

    Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.


  • Bitumastic 300 M COE

    Features:

    • Excellent chemical, corrosion and abrasion resistance
    • High-build, 12-14 mils (300-350 microns) in a single coat
    • Compatible with controlled cathodic protection
    • Meets Corps of Engineers C200, C200a specification
    • Suitable for use in exposures as referenced in the following specifications: SSPC-Paint 16 & Steel Tank Institute Corrosion Control System STI-P3

    Description:

    Renowned high build coal tar epoxy for protection for steel and concrete in single or two-coat applications developed specifically for the Corps of Engineers (COE).


  • Bitumastic 50

    Features:

    • Application up to 30 dry mils (750 microns) in a single coat
    • Self priming, single-coat capabilities
    • Excellent corrosion resistance
    • Complies with MIL-C-18480-B and Bureau of Reclamation CA50 specifications

    Description:

    Ultra-high build, single-component coal tar mastic for protecting steel and concrete substrates subject to aggressive conditions and for below grade damp proofing requirement


  • Carbocoat 112

    Features:

    • Complies with the performance requirements of CISC/CPMA Standard 1-73a and Standard 2-75
    • Good corrosion protection for interior and exterior exposures
    • Fast dry to handle and topcoat

    Description:

    Fast dry corrosion inhibitive alkyd primer. Can be used for interior and exterior service for corrosion protection. Applications on iron, steel and many other metals.


  • Carbocoat 115

    Features:

    • Rapid cure
    • VOC compliant for most areas
    • Good for filling properties on rough and pitted steel
    • Fast dry to handle properties

    Description:

    Fast drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. May be topcoated with conventional alkyds or acrylics for color, aesthetics or additional protection.


  • Carbocoat 115 VOC

    Features:

    • Fast Dry
    • VOC compliant to 340 g/l

    Description:

    Carbocoat 115 VOC is a fast drying, low VOC industrial maintenance, lead and chromate free, shop and field primer. It is especially designed for architectural ferrous metal or exposed structural steel, and is best applied by spray only. Carbocoat 115 VOC can be top coated with acrylics, alkyds or single package polyurethane finishes. It is often used as a construction primer for structural steel that will eventually reside in interior spaces.


  • Carbocoat 116

    Features:

    • Fast Dry
    • VOC compliant less than 250 g/l

    Description:

    Fast drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. May be topcoated with conventional alkyds and acrylics for color, aesthetics, or additional protection.


  • Carbocoat 150 Universal Primer

    Features:

    • Corrosion resistant coating with zinc phosphate corrosion inhibitor
    • Good for extended exposure demands
    • Heavy-metal free
    • VOC compliant for most areas
    • Accepts wide range of topcoats

    Description:

    Heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.


  • Carbocoat 2600

    Features:

    • Excellent weathering characteristics
    • Calcium sulfonate and other unique rust-inhibitive pigments
    • High solids allows for single coat applications
    • Single component
    • Pre-thinned; ready-to-apply
    • VOC-compliant for most areas

    Description:

    Single-coat primer/finish with unique ion-exchange corrosion inhibitors frequently used as a metallic - finish maintenance coating for aged galvanized and rusty steel. Slow drying characteristics allow for excellent wetting and penetration to hand or power tooled cleaned surfaces. Frequently used in the Power, Transmission/Distribution and Bridge markets.


  • Carbocoat 2901

    Features:

    • Good corrosion protection and weatherability
    • Ion exchange corrosion protection
    • Excellent application properties
    • Single component
    • Pre-thinned; ready-to-apply
    • VOC-compliant for most areas

    Description:

    Single-component metallic-finish maintenance coating formulated with a unique pigment system that inhibits corrosion through ion exchange technology. Self-priming, fast dry characteristics well suited for the Power, Transmission/Distribution and Bridge markets.


  • Carbocoat 30

    Features:

    • Versatile multi-purpose coating
    • 30% silicone content
    • Tough, high gloss finish
    • Excellent application properties
    • VOC-compliant for most areas
    • Excellent brush/roll/spray properties
    • Outstanding flow and leveling

    Description:

    High solids, high gloss, finish with 30% silicone modification that provides excellent weathering performance as an exterior enamel. Can also be used interior as a high gloss maintenance product with ease of use characteristics


  • Carbocoat 56

    Features:

    • Smooth, attractive, high gloss finish.
    • Direct-to-metal application if desired.
    • Very good weatherability, gloss and color retention.
    • Outstanding application characteristics.
    • Economical, fast dry.
    • Good flexibility.
    • Impact and abrasion resistant.
    • VOC-compliant for most areas.

    Description:

    A high solids, general purpose air dry enamel that is used as a protective finish coat and formulated to meet the needs and requirements of the Rail Industry. Carbocoat 56 may be applied direct to metal or as a topcoat over Carbocoat 55.


  • Carbocoat 8215

    Features:

    • Smooth, attractive, semi-gloss finish.
    • Direct-to-metal application if desired.
    • Good weatherability, gloss and color retention.
    • Contains corrosion inhibitor.
    • Excellent application characteristics.
    • Quick dry to handle times
    • Good flexibility
    • Impact and abrasion resistant
    • VOC-compliant for most areas

    Description:

    A high solids, quick-dry, general purpose air dry enamel that is used as a self-priming finish coat. Carbocoat 8215 has exceptional application characteristics, fast dry properties and very good corrosion protection as a direct to metal coating. Is used as an OEM finish for a variety of applications. It Is also recommended for light to moderate industrial use for new construction or maintenance.


  • Carbocoat 8215 VOC

    Features:

    • Smooth, attractive, semi-gloss finish
    • Direct-to-metal application if desired.
    • Good weatherability, gloss and color retention
    • Contains corrosion inhibitor
    • Excellent application characteristics.
    • Quick dry to handle times
    • Good flexibility
    • Impact and abrasion resistant
    • VOC-compliant for most areas
    • HAP’s = 0.6 lbs/solid gallon

    Description:

    A high solids, quick-dry, general purpose air dry enamel that is used as a self-priming finish coat. Carbocoat 8215 VOC has exceptional application characteristics, fast dry properties and very good corrosion protection as a direct to metal coatings. Is used as an OEM finish for a variety of applications. It Is also recommended for light to moderate industrial use for new construction or maintenance. It meets the 340 g/l VOC limit and has very low HAP’s at 0.6 lbs/solid gal.


  • Carbocoat 8216 Non-Skid

    Features:

    • Non-skid finish
    • Direct-to-metal application if desired.
    • Good weatherability, gloss and color retention
    • Contains corrosion inhibitor
    • Excellent application characteristics.
    • Quick dry to service times
    • Good flexibility
    • Impact and abrasion resistant
    • VOC-compliant for most areas

    Description:

    A high solids, quick-dry, general-use, air dry enamel that is used as a self-priming, non-skid finish for light duty to medium use foot traffic. High profile aggregate provides very good non-slip properties. This product has exceptional application characteristics, fast dry properties and very good corrosion protection as a direct to metal coating.


  • Carbocoat 8229 Non-Lift Primer

    Features:

    • Good for extended exposure demands
    • Ability to be welded through
    • Heavy-metal free
    • VOC compliant for most areas
    • VOC = 2.3 lbs/gallon
    • Meets the requirements of Class A Slip Coefficient testing

    Description:

    Heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.


  • Carbocoat 8239

    Features:

    • Good corrosion protection for interior and exterior exposures
    • Universal primer - accepts solvent borne topcoats
    • Approved for MPI #76
    • Approved for MPI #79
    • Fast dry to handle and topcoat
    • Zero HAP's
    • VOC compliant for most areas
    • Low odor
    • Meets the requirements of the Steel Door Institute (ANSI/SDI A250.10)

    Description:

    Zero HAP's, fast dry corrosion inhibitive universal alkyd primer. May be top coated with a variety of finishes, including alkyd, epoxy, polyurethanes, as well as conventional coatings. Can be used for interior or exterior service as a prime for atmospheric protection. Applications on iron, steel and many other metals.


  • Carbocoat 8259 WR

    Features:

    • Fast-dry
    • Corrosion resistant
    • Low VOC
    • Reduce and clean up with water
    • Direct to metal capability
    • Flash rust resistant
    • Surface tolerant

    Description:

    This fast dry water reducible alkyd finish is designed for spray, brush or roller application to metallic surfaces. It offers ease of application, excellent gloss retention, and corrosion resistance. It is intended for industrial use on bare metal or primed surfaces where mild corrosion resistance is needed.


  • Carbocoat 8287 WR

    Features:

    • Fast-dry
    • Corrosion protection
    • Contains zinc phosphate (red only)
    • Flash rust resistant
    • Surface tolerant
    • Low odor
    • Low-VOC

    Description:

    This fast dry water reducible alkyd primer is designed for spray, brush or roller application for metallic surfaces and may be used as a universal primer. It offers ease of application, superior adhesion, retention, and extreme flexibility. It is easy to apply and offers superior sag resistance and sheen uniformity.


  • Carbocoat OEM Universal Primer

    Features:

    • Good for extended exposure demands
    • Ability to be welded through
    • Heavy-metal free
    • VOC compliant for most areas

    Description:

    Heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.


  • Carbocrylic 1295 HS

    Features:

    • Offers excellent corrosion and weathering protection.
    • NORSOK Approved for offshore
    • Recommended for chemical industry, offshore, power and heavy industry.

    Description:

    Carbocrylic is a high solids topcoat with good weathering capabilities. Offers a glossy, smooth, hard finish that is easy cleanable. One coat application capable.


  • Carbocrylic 3350

    Features:

    • Excellent performance over inorganic zinc primers
    • Superior color and gloss retention
    • Single component
    • Spray, brush and roll
    • Low odor, low VOC
    • Very good filling properties for masonry surfaces

    Description:

    Versatile coating with excellent performance properties. Frequently used in the bridge market as a finish coat over inorganic zinc primers, as well as a user-friendly finish for numerous other substrates. Various off-white colors such as S800 made with our rapid tint system or package colors may be used as a block-filler.


  • Carbocrylic 3356-1

    Features:

    • Low odor
    • Excellent flexibility
    • Excellent corrosion protection
    • Excellent resistance to flash rusting
    • Meets most VOC regulations

    Description:

    A single package, high performance, direct-to-metal acrylic system. Carbocrylic 3356 has exceptional film strength and chemical resistance. Carbocrylic 3356 consists of five VOC compliant acrylic coatings for applications on tank exteriors and structural steel. May be used as a two, three or four coat all acrylic system. Carbocrylic 3356-1 (white) and 3356-2 (brown) are typically used as primers and are interchangeable as primers (white or brown as primer). In addition, Carbocrylic 3356-2 (brown) may also be used as a topcoat when a color match to weathering steel is desired.


  • Carbocrylic 3356-2

    Features:

    • Low odor
    • Excellent flexibility
    • Excellent corrosion protection
    • Excellent resistance to flash rusting
    • Meets most VOC regulations

    Description:

    A single package, high performance, direct-to-metal acrylic system. Carbocrylic 3356 has exceptional film strength and chemical resistance. Carbocrylic 3356 consists of five VOC compliant acrylic coatings for applications on tank exteriors and structural steel. May be used as a two, three or four coat all acrylic system. Carbocrylic 3356-1 (white) and 3356-2 (brown) are typically used as primers and are interchangeable as primers (white or brown as primer). In addition, Carbocrylic 3356-2 (brown) may also be used as a topcoat when a color match to weathering steel is desired.


  • Carbocrylic 3356-3

    Features:

    • Low odor
    • Excellent flexibility
    • Excellent corrosion protection
    • Excellent resistance to flash rusting
    • Meets most VOC regulations

    Description:

    A single package, high performance, direct-to-metal acrylic system. Carbocrylic 3356 has exceptional film strength and chemical resistance. Carbocrylic 3356 consists of five VOC compliant acrylic coatings for applications on tank exteriors and structural steel. May be used as a two, three or four coat all acrylic system. Carbocrylic 3356-1 (white) and 3356-2 (brown) are typically used as primers and are interchangeable as primers (white or brown as primer). In addition, Carbocrylic 3356-2 (brown) may also be used as a topcoat when a color match to weathering steel is desired.


  • Carbocrylic 3356-4

    Features:

    • Low odor
    • Excellent flexibility
    • Excellent corrosion protection
    • Excellent resistance to flash rusting
    • Meets most VOC regulations

    Description:

    A single package, high performance, direct-to-metal acrylic system. Carbocrylic 3356 has exceptional film strength and chemical resistance. Carbocrylic 3356 consists of five VOC compliant acrylic coatings for applications on tank exteriors and structural steel. May be used as a two, three or four coat all acrylic system. Carbocrylic 3356-1 (white) and 3356-2 (brown) are typically used as primers and are interchangeable as primers (white or brown as primer). In addition, Carbocrylic 3356-2 (brown) may also be used as a topcoat when a color match to weathering steel is desired.


  • Carbocrylic 3356-6

    Features:

    • Low odor
    • Excellent flexibility
    • Excellent corrosion protection
    • Excellent resistance to flash rusting
    • Meets most VOC regulations

    Description:

    A single package, high performance, direct-to-metal acrylic system. Carbocrylic 3356 has exceptional film strength and chemical resistance. Carbocrylic 3356 consists of five VOC compliant acrylic coatings for applications on tank exteriors and structural steel. May be used as a two, three or four coat all acrylic system. Carbocrylic 3356-1 (white) and 3356-2 (brown) are typically used as primers and are interchangeable as primers (white or brown as primer). In addition, Carbocrylic 3356-2 (brown) may also be used as a topcoat when a color match to weathering steel is desired.


  • Carbocrylic 3357 HB

    Features:

    • Smooth, attractive, high build finish
    • Excellent weatherability, gloss and color retention
    • Low odor, low VOC
    • Excellent corrosion protection when coupled with the appropriate primer
    • Outstanding application characteristics
    • Single component

    Description:

    A high build waterborne acrylic with excellent weatherability and corrosion resistance when coupled with the appropriate primer.


  • Carbocrylic 3358

    Features:

    • Single component
    • Resistant to flash rusting
    • Outstanding corrosion protection
    • Low odor, low VOC

    Description:

    Surface tolerant direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP2 and SP3-cleaned steel.


  • Carbocrylic 3358 MC

    Features:

    • Single component
    • Resistant to flash rusting
    • Outstanding corrosion protection
    • Low odor, low VOC*

    Description:

    Surface tolerant direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP2 and SP3-cleaned steel. May also be used as a primer or block filler over concrete masonry units. Acceptable for use on LEED projects.


  • Carbocrylic 3358-G

    Features:

    • Single component
    • Resistant to flash rusting
    • Outstanding corrosion protection
    • Graphite reinforced
    • Excellent acid splash/fume resistance
    • Low odor, low VOC

    Description:

    High performance graphite reinforced direct-to-metal primer with excellent corrosion resistant properties, resistance to flash rusting and suitability for SPPC-SP3 and SP6-cleaned steel. Formulated specifically for chemical resistance to acids and chemicals.


  • Carbocrylic 3359

    Features:

    • Multi-purpose interior/exterior coating
    • Excellent color and gloss retention
    • Single component
    • Outstanding corrosion protection
    • Low odor, low VOC
    • Acceptable for use in USDA facilities

    Description:

    Versatile high performance finish with excellent corrosion resistance and exterior weathering properties.


  • Carbocrylic 3359 DTMC

    Features:

    • Smooth, attractive, high build finish
    • Excellent weatherability, gloss and color retention
    • Low odor
    • Excellent corrosion protection
    • Meets most VOC regulations
    • Excellent resistance to flash rusting
    • Outstanding application characteristics
    • Dry-fall* properties
    • Excellent adhesion to FBE

    Description:

    A single component durable, high performance direct-to-metal acrylic coating for use where excellent weathering properties and chemical resistance are required. Use as a direct-to-metal acrylic coating for light to medium duty service on tank exteriors, piping, and structural steel. May also be used as a finish coat over recommended primers.


  • Carbocrylic 3359 Flat

    Features:

    • Multi-purpose interior/exterior coating
    • Excellent color retention
    • Single component
    • Outstanding corrosion protection
    • Low odor, low VOC

    Description:

    Versatile high performance finish with excellent corrosion resistance and exterior weathering properties, as well as suitability for interior and mild environments.


  • Carbocrylic 3359 MC

    Features:

    • Multi-purpose interior/exterior coating
    • Excellent color and gloss retention
    • Single component
    • Outstanding corrosion protection
    • Low odor, low VOC*

    Description:

    Versatile high performance finish with excellent corrosion resistance and exterior weathering properties, as well as suitability for interior and mild environments.


  • Carboglas 1601 SG

    Features:

    • Outstanding marine exposure resistance (atmospheric, tidal, subsea)
    • Excellent resistance to both organic and mineral acids
    • Excellent abrasion and impact resistance
    • Excellent resistance to bleach solutions and free chlorine
    • Outstanding long-term protection

    Description:

    This extremely durable and chemically resistant cladding utilizes a multi-step curing process that incorporates chemically-fused glass flake reinforcing in a highly cross-linked polyester matrix. The resultant layer is an extremely durable barrier against a variety of exposures including marine, fresh water, salt water, both mineral and organic acids, bleach solutions, and free chlorine. The multi-layer glass-flake reinforcement greatly impedes the penetration of water and other corrosives making this system extremely long performing.


  • Carboguard 1207

    Features:

    • Superior abrasion resistance
    • Excellent resistance to aerated seawater and various other chemicals
    • Excellent immersion performance
    • Easy to repair
    • VOC compliant to current AIM regulations

    Description:

    Ultra-durable solvent-free coating for use on steel and concrete substrates subject to severe impact and physical abuse. This aggregate filled coating offers exceptional abrasion resistance in heavy-duty marine and splash zone environments. It is ideal for high abuse areas on offshore structures exposed to aerated sea water (splash zone), boat landing areas, or working decks, lay down areas, helidecks, or walkways. It can be also be used for buried pipe due to its outstanding physical durability. Consult Carboline Tech Service for high profile non-skid applications.


  • Carboguard 1209

    Features:

    • Excellent abrasion resistance
    • Excellent chemical resistance
    • Outstanding impermeability
    • Single coat, self-priming capabilities
    • VOC compliant to current AIM regulations
    • Non-skid surface (optional)

    Description:

    Dense, highly impermeable glass flake-filled coating used for protecting steel and concrete. This versatile coating provides an impenetrable film for severe exposures in marine, offshore, petrochemical, pulp and paper and other aggressive environments. Optional use of light or course grit fillers provides nonskid properties.


  • Carboguard 1340

    Features:

    • Exceptional wetting characteristics
    • Low stress, highly flexible film
    • Very high solids
    • Low odor
    • User-friendly brush & roller application
    • VOC compliant to current AIM regulations

    Description:

    Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. When applied to “green” concrete it will retard the escape of moisture during the cure period. It is also excellent for use as a form release coating on plywood or steel forms.


  • Carboguard 1340 WB

    Features:

    • Has excellent adhesion to concrete
    • Can be used over dry or damp concrete
    • Provides improved bond to damp concrete
    • Low odor; Low VOC
    • Fast dry to topcoat

    Description:

    Carboguard 1340 WB is a two component, waterborne epoxy primer used as a primer/sealer for concrete substrates. It promotes the adhesion of a variety of topcoats including polyurethane/polyurea elastomers. It can be used on dry or damp concrete. It is particularly effective to prime damp concrete substrates prior to the application of topcoats that might otherwise be compromised by any surface moisture.


  • Carboguard 1340N

    Features:

    • Exceptional wetting characteristics
    • Low stress, highly flexible film
    • Very high solids
    • Low odor
    • User-friendly brush & roller application
    • VOC compliant to current AIM regulations
    • Suitable for use in Nuclear Service Level 1

    Description:

    Penetrating primer/sealer for use on concrete substrates. It is a nuclear grade, DBA tested and certified for use in Nuclear Level 1 areas in a variety of systems with appropriate finish coats.


  • Carboguard 235

    Features:

    • Surface tolerant properties
    • Excellent as a ballast tank lining
    • Fast and low-temperature cure
    • Excellent general service epoxy
    • Excellent maintenance primer

    Description:

    Carboguard 235 is a phenalkamine modified, surface-tolerant, epoxy specially formulated for application in marine and other severe service industrial environments and is suitable for fresh and salt water immersion resistance. This high solids, high performance epoxy is application friendly and can be used at low temperatures down to 20°F.


  • Carboguard 235 HAR

    Features:

    • High abrasion resistance
    • Surface tolerant properties
    • Fast and low-temperature cure
    • Outstanding as a heavy duty hull coating for marine

    Description:

    Carboguard 235 HAR is a high abrasion resistant phenalkamine modified, surface-tolerant, epoxy specially formulated for application in marine and other severe service industrial environments and is suitable for fresh and salt water immersion resistance. This high solids, high performance epoxy is application friendly and can be used at low temperatures down to 20°F.


  • Carboguard 501

    Features:

    • Solvent free
    • Excellent film strength, abrasion, and impact resistance
    • Rapid hardening for quick service
    • Easy to mix ratios
    • Excellent film build and working properties

    Description:

    Epoxy patching and surfacing compound that exhibits excellent bond strength and chemical resistance to a variety of acids, alkalies, salt solutions and oils. It is used to fill voids and bugholes in precast or poured-in-place concrete and other masonry surfaces. Repairs damaged concrete, fills narrow cracks, and can be used as a coving material for floor-wall transitions or lap joint areas. May also be used to repair weld seams and pits in metal for potable water service with a compatible ANSI/NSF 61 approved lining.


  • Carboguard 510

    Features:

    • Epoxy modification improves chemical resistance for wastewater environment
    • Water based, low odor
    • Can be used if the substrate is saturated surface damp or "SSD"
    • Excellent film strength, abrasion, and impact resistance
    • Is castable, making it suitable for restoring pump foundations
    • Easily topcoated to provide additional chemical resistance or appearance
    • Used as a primer by mixing Parts A and B only - no sand, cement or aggregates
    • Topcoated with Carboline's lining systems provides protection from H2S or MIC

    Description:

    An economical water-based epoxy primer or resurfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. As a mortar it is ideally suited for patching spalled concrete, filling large cracks, or as a coving and sloping material for floor-wall transitions.


  • Carboguard 510 SG

    Features:

    • Epoxy modification improves chemical resistance for wastewater environment
    • Trace VOC
    • Water based, low odor
    • Excellent film strength, abrasion, and impact resistance
    • Easily topcoated to provide additional chemical resistance or appearance
    • Self-priming over concrete
    • Aggregate reinforced

    Description:

    A spray-grade, economical, epoxy-based repair mortar, patching and surfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. It is ideally suited for resurfacing deteriorated concrete in wastewater environment. Topcoated with Carboline's lining systems provides protection from H2S or MIC. Unique spray grade (SG) formulation speeds application properties for quick turnaround projects.


  • Carboguard 553

    Features:

    • Low odor
    • Very low VOC
    • Fast drying
    • Excellent corrosion protection
    • Very good chemical resistance
    • Contains corrosion inhibitive pigments

    Description:

    A water based epoxy primer that is easy to apply and has very good chemical resistance. Carboguard 553 primer has significant improvements in film hardness and toughness over straight acrylic or acrylic-epoxy systems. It provides better chemical resistance and physical properties. It can be used in more moderate to aggressive exposures.


  • Carboguard 571

    Features:

    • Single coat, high performance protection
    • High build capabilities in one coat
    • Excellent corrosion protection
    • Low odor during application; zero odor after cure
    • Fast dry, rapid cure with low temperature bake
    • Excellent impact and abrasion resistance
    • Complies with FDA 21CFR 175.300 criteria for food contact
    • VOC compliant to current AIM regulations

    Description:

    Solvent-free plural component-applied coating commonly used for tank lining applications in the rail industry (corn syrup cars) and other in-shop applications where single-coat and fast handling capabilities are primary requirements.


  • Carboguard 60

    Features:

    • Laboratory qualified for multiple ISO 12944 atmospheric-corrosivity categories
    • Low odor and low VOC
    • Available in a variety of rapid tint colors*
    • Attractive medium sheen for tank exteriors
    • Good chemical resistance
    • Used as a primer, intermediate, or finish coat
    • Fast cure & dry times
    • Can be applied over power tool cleaned surfaces
    • VOC compliant to current AIM regulations
    • Good abrasion resistance
    • Approved MPI #108

    Description:

    Carboguard 60 is a high solids, versatile, abrasion resistant, chemical resistant, and corrosion resistant coating. It can be used as a primer, intermediate coat, or self-priming finish over steel or inorganic zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. This product has excellent wetting properties giving it the capability of going over marginally prepared substrates. It is ideal for maintenance and fabrication shop applications. An optional Glass Flake (GF) additive or micaceous iron oxide (MiO) additive can be purchased separately and may be used to enhance film strength for more abusive applications for severe marine or heavy industrial uses. Consult Technical Service for suitability as a lining or other exposures.


  • Carboguard 60 T

    Features:

    • Ready to spray as supplied
    • High solids, low VOC
    • Easy 1:1 mix ratio
    • Long pot life
    • Self-priming finish
    • Surface tolerant
    • Long recoat window

    Description:

    Carboguard 60 T is a ready-to-spray, high solids, versatile corrosion resistant coating for the protection of many steel surfaces from atmospheric weathering including railcars, tanks, equipment, piping and structural steel. It can be used as a primer, or self-priming finish direct to steel. It may be topcoated with a broad variety of high performance finish coats. This product has excellent wetting properties giving it the capability of going over marginally prepared substrates.


  • Carboguard 60 Tank White

    Features:

    • Low odor and low VOC
    • Available in self-cleaning white
    • May be used as a primer, intermediate, or finish coat
    • Fast cure & dry times
    • Can be applied over power tool cleaned surfaces
    • VOC compliant to current AIM regulations

    Description:

    Carboguard 60 Tank White is a specially formulated high solids, versatile corrosion resistant coating designed for use as a weathering finish for exterior use. It has the unique ability to freely chalk on UV exposure to maintain a white appearance over its useful life making it ideal for tank exteriors and the like for both new construction or maintenance.


  • Carboguard 635

    Features:

    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks

    Description:

    An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Can be used direct to metal as a corrosion resistant primer, an intermediate coating over itself and many other primers, and can be used as a finish coat. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in fresh or salt water (marine) exposures. Meets IMO performance for ballast tanks for marine vessels.


  • Carboguard 635 HAR

    Features:

    • High abrasion resistance
    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Meets VOC restrictions

    Description:

    A highly abrasion resistant, all-purpose epoxy with a variety of attributes including low-temperature cure, surface tolerance, fast re-coat times, moisture tolerance during application and cure, and excellent corrosion protection. Carboguard 635 HAR can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers particularly where abrasion resistance is needed. It is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. It may also be used for immersion in fresh or salt water (marine) exposures.


  • Carboguard 635 VOC

    Features:

    • Low temperature cure (20°F)
    • Excellent corrosion protection
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Continues to cure underwater
    • Extended recoat window for atmospheric exposures (6 months for most topcoats)
    • Low VOC and low HAPs content
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
    • Meets IMO Performance Standard for Protective Coatings MSC.215(82): 2006 for sea water ballast tanks

    Description:

    An all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. It has low VOC and low HAP's content for use in areas with restricted volatile emissions. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in potable water, fresh or salt water (marine) exposures.


  • Carboguard 690

    Features:

    • High solids, low VOC
    • High build (16 mils)
    • Low temperature cure (20°F)
    • Excellent moisture tolerance during application
    • Continues to cure underwater
    • Fast cure response
    • Suitable for use in USDA inspected facilities

    Description:

    High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used on structural steel, piping, tankage, and equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects; and is ideal for coatings under insulation up to 300°F (149°C).


  • Carboguard 690 GF

    Features:

    • High solids, low VOC
    • High build (20+ mils)
    • Low temperature cure (20°F)
    • Excellent moisture tolerance during application
    • Continues to cure underwater
    • Fast cure response
    • Excellent physical and barrier properties

    Description:

    High performance, glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Glass flake reinforcement enhances film strength, impact resistance and barrier properties. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects.


  • Carboguard 695 CLR

    Features:

    • Solventless, high performance protection
    • Low-to-no odor
    • Easy to apply by standard equipment
    • Excellent chemical resistance
    • Fast cure
    • Tough abrasion resistant film
    • Excellent flexibility
    • Excellent corrosion protection
    • Impact resistant
    • High-build application
    • "Long fiber" internal film reinforcement
    • Low temperature cure (35 °F)

    Description:

    Solventless, clear, epoxy lining that can be applied using reinforced glass fibers specifically designed to comply with API RP652 for thick-film tank bottom lining repairs. API RP652 specifically recommends "long fiber" reinforcement which can be achieved using a glass mat or chopped glass. The system is suitable for exposures in water, crude oil, aromatic distillates and unblended gasolines. It can be applied by standard or plural-component airless spray equipment depending on the glass reinforcement used.


  • Carboguard 824

    Features:

    • Immersion grade epoxy
    • Excellent for harsh marine or industrial exposures
    • Qualified under MIL-DTL-24441D Type IV

    Description:

    Carboguard 824 is a VOC compliant, two coat, epoxy polyamide system for use where marine coating regulations are restricted to a maximum VOC of 340 g/l or 2.8 lb/gal. The system is specifically formulated for use in immersion service; it is highly versatile and may also be used as an intermediate coating for a variety of industrial applications. Carboguard 824 is for use over properly prepared steel and aluminum substrates that will be subject to exposure in harsh industrial and marine environments.


  • Carboguard 824 Primer (F-150)

    Features:

    • Immersion grade epoxy
    • Excellent for harsh marine or industrial exposures
    • Qualified under MIL-DTL-24441D Type IV

    Description:

    Carboguard 824 is a VOC compliant, two coat, epoxy polyamide system for use where marine coating regulations are restricted to a maximum VOC of 340 g/l or 2.8 lb/gal. The system is specifically formulated for use in immersion service; it is highly versatile and may also be used as an intermediate coating for a variety of industrial applications. Carboguard 824 is for use over properly prepared steel and aluminum substrates that will be subject to exposure in harsh industrial and marine environments.


  • Carboguard 868 Non-Skid

    Features:

    • Excellent film build properties
    • Non-skid finish
    • Excellent edge retention

    Description:

    Carboguard 868 Non-Skid is a two component, polyamide modified, low VOC, high performance coating for demanding industrial maintenance, marine and architectural applications. It is a tough and durable satin finish ideal for use on steel, galvanized, aluminum and masonry. It should be used wherever non-skid properties, chemical and abrasion resistance, resistance to corrosive environments and outstanding adhesion are essential. It is suitable for use in refineries, offshore platforms, marine environments, chemical plants, food & beverage plants and pulp & paper mills or other industrial applications.


  • Carboguard 868 Non-Skid LT

    Features:

    • Excellent film build properties
    • Non-skid finish
    • Excellent edge retention
    • Low temperature cure

    Description:

    Carboguard 868 Non-Skid LT is a two component, polyamide modified, low VOC, high performance coating for demanding industrial maintenance, marine and architectural applications. It is a tough and durable satin finish ideal for use on steel, galvanized, aluminum and masonry. It should be used wherever non-skid properties, chemical and abrasion resistance, resistance to corrosive environments and outstanding adhesion are essential. It is suitable for use in refineries, offshore platforms, marine environments, chemical plants, food & beverage plants and pulp & paper mills or other industrial applications. A low temperature curative (Part B) speeds cure and lowers application temperatures to 35 °F.


  • Carboguard 869 Non-Skid

    Features:

    • Easy mix; non settling; 2-component
    • Constant agitation not required during installation
    • Short sweat-in time; long pot life
    • Unique aggregate package for improved nonslip properties
    • Dry hard overnight
    • Excellent film build properties

    Description:

    Carboguard 869 Non-Skid is a two component, polyamide modified, low VOC, high performance coating for demanding industrial maintenance, marine and architectural applications. It is a tough and durable satin finish perfect for use on steel, galvanized, aluminum and masonry. It has a unique non-skid filler package which requires no agitation during application. In spite of its apparent lower profile aggregate, it has improved non-slip properties over larger aggregate materials, even when wet. It has excellent chemical and abrasion resistance, particularly in marine or other corrosive environments. It is suitable for use on properly prepared concrete & steel surfaces in refineries, offshore platforms, chemical plants, food & beverage plants and pulp & paper mills.


  • Carboguard 869 Non-Skid LT

    Features:

    • Easy mix; non settling; 2-component
    • Constant agitation not required during installation
    • Short sweat-in time; long pot life
    • Unique aggregate package for improved nonslip properties
    • Dry hard overnight
    • Excellent film build properties

    Description:

    Carboguard 869 Non-Skid is a two component, polyamide modified, low VOC, high performance coating for demanding industrial maintenance, marine and architectural applications. It is a tough and durable satin finish perfect for use on steel, galvanized, aluminum and masonry. It has a unique non-skid filler package which requires no agitation during application. In spite of its apparent lower profile aggregate, it has improved non-slip properties over larger aggregate materials, even when wet. It has excellent chemical and abrasion resistance, particularly in marine or other corrosive environments. It is suitable for use on properly prepared concrete & steel surfaces in refineries, offshore platforms, chemical plants, food & beverage plants and pulp & paper mills.


  • Carboguard 876

    Features:

    Description:

    A modified epoxy formulated to provide outstanding corrosion resistance as a single-coat, direct-to-metal (DTM) exterior coating for railcars and other structures. While all epoxies will chalk and yellow under UV exposure; Carboguard 876 resists this effect better than most.


  • Carboguard 877

    Features:

    • Excellent corrosion protection
    • Very smooth finish to enhance topcoat appearance
    • Tough, flexible and impact resistant
    • Good abrasion resistance
    • VOC compliant to current AIM regulations
    • Easy 1:1 ratio for convenience

    Description:

    A high solids, high build rust inhibitive epoxy primer with excellent corrosion resistance for long-term protection of the exterior of railcars. May be applied by standard or plural component airless equipment and is easily applied by brush or roll method for touch up. Performs extremely well under a wide variety of topcoats.


  • Carboguard 890

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Conventional and low-temperature versions
    • Self-priming and primer/finish capabilities
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities
    • Intermediate coat for AWWA D102 Outside System #6 and #7
    • Approved MPI #98

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions. An optional micaceous iron oxide additive (MIO Filler) can be purchased separately and may be used per the Product Data Sheet to enhance corrosion protection and film strength for more aggressive service such as severe marine or heavy industrial uses.


  • Carboguard 890 GF

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Low-temperature version: 890 LT GF
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations
    • Non-skid service with optional fillers

    Description:

    A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.


  • Carboguard 890 GF2

    Features:

    • Convenient two-component mix
    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations

    Description:

    A two-component, glass reinforced epoxy coating. 890 GF2 is chemical resistant and has a wide range of uses in industrial environments. Its glass reinforcement allows for excellent internal film strength, hardness, impact, and abrasion resistance. Most commonly, it is used in severe service (above or below the water line) in marine applications where these resistance qualities are desired.


  • Carboguard 890 LT

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Low-temperature cure formulation
    • Self-priming capability
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Excellent for use as a primer or intermediate coat where low temperature cure is needed. Can be used in a variety of chemical environments. May be used as a self-priming or finish coat on exterior exposure if discoloration can be tolerated.


  • Carboguard 890 LT GF

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics for less severe applications
    • Conventional and low-temperature versions
    • Self-priming and primer/finish capabilities
    • Excellent abrasion resistance & hardness
    • VOC compliant to current AIM regulations
    • Non-skid service with optional fillers

    Description:

    A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service above the water line in marine applications where these resistance qualities are desired.


  • Carboguard 890 VOC

    Features:

    • Excellent chemical resistance
    • Surface tolerant characteristics
    • Self-priming and primer/finish capabilities
    • Very good abrasion resistance
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities

    Description:

    Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Carboguard 890 VOC serves as stand-alone system for a variety of chemical environments.


  • Carboguard 8902 FC

    Features:

    • Solvent-free
    • Direct-to-metal / self-priming
    • Single coat economics
    • Excellent corrosion and chemical resistance
    • Fast-dry properties

    Description:

    Carboguard 8902 FC is a solvent-free, two component, amine cured epoxy formulated for use as a direct-to-metal (DTM) exterior coating with excellent corrosion and chemical resistance. It has very fast dry to handle and cure properties making it desirable for shop applications. Used as a single-coat, protective coating for a variety of uses including equipment, piping, structural steel, and tankage exposed to corrosive and/or abusive service.


  • Carboguard 890N

    Features:

    • Can be applied direct to steel without a primer
    • Single coat, high build capabilities
    • Can be applied to minimally prepared surfaces
    • Compatible to many existing, aged epoxies and inorganic zinc coatings
    • Easily decontaminated
    • DBA tested and qualified for Nuclear Service Level 1
    • Resistant to high levels of radiation
    • High solids and low VOC help reduce effects on charcoal filters
    • Application-friendly characteristics minimize manrem exposure
    • Suitable for use under insulation on hot surfaces operating up to 300°F (149°C) outside level 1 areas.

    Description:

    Nuclear grade, DBA tested, self priming epoxy. Tested and certified for use in Nuclear Level 1 areas in a variety of systems.


  • Carboguard 891

    Features:

    • Excellent film build and edge protection
    • VOC compliant to current AIM regulations
    • Meets or exceeds all requirements of: ANSI/NSF Std. 61 for potable water tanks*
    • AWWA D102 Inside System 1 and 2
    • AWWA C210 for use on interior of steel water pipe
    • Complies with FDA 21CFR 175.300 criteria for food contact

    Description:

    High solids, high-build potable water coating widely used for lining interior steel and concrete tanks, valves and pipe. Formulated for application at conventional builds (4.0-6.0 mils per coat) as well as high builds (10.0 mils per coat).


  • Carboguard 891 VOC

    Features:

    • Meets the FDA requirements for 21CFR 175.300 for direct food contact
    • Meets the requirements of AWWA C210
    • Ultra High solids; Low VOC and HAPs
    • Handles deionized water up to 150°F (66°C)
    • Ultra low VOC (67 g/l)
    • Good chemical resistance
    • Excellent thermal shock resistance
    • Good abrasion resistance

    Description:

    Ultra high solids epoxy that is designed as a liner for water, demineralized water, wastewater and many other services. It is widely used as a tank lining for steel and concrete tanks. Product is self-priming and is normally applied in two coats. Formulated for application at conventional builds (4 to 6 mils per coat) as well as high builds (10 mils per coat).


  • Carboguard 892

    Features:

    • Compatible over tightly adhered rust and old coatings in mild environments.
    • Very good abrasion resistance.
    • Excellent performance in wet exposures.
    • Meets FDA 21 CFR 175.300 criteria for direct food contact.
    • Acceptable for incidental food contact surfaces in federally inspected meat and poultry facilities.
    • VOC compliant to current AIM regulations.

    Description:

    A high solids, semi-gloss, high build, self-priming epoxy that can be applied by spray, brush, or roller. The cured film provides a tough, cleanable and aesthetically pleasing surface. Recommended uses for Carboguard 892 include railcar hopper interiors carrying dry food-grade cargoes. Other applications include food, meat, poultry, beverage, and pharmaceutical plants.


  • Carboguard 8922

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Used as a primer or intermediate coat
    • Can be applied over power tool cleaned surfaces
    • Wet on wet application at 75 ° F (24 °C) substrate temperature
    • Acceptable over iron phosphate preparation

    Description:

    Carboguard 8922 is a versatile corrosion resistant coating. May be topcoated with itself, or a broad variety of high performance finish coats. Carboguard 8922 has surface tolerant properties.


  • Carboguard 8922 LH

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required
    • Economical fit for use epoxy
    • Used as a primer or intermediate coat
    • Can be applied over power tool cleaned surfaces
    • Wet on wet application at 75° F (24°C) substrate temperature
    • Acceptable over iron phosphate preparation
    • Low HAPS of 1.85 pounds/solid gallon

    Description:

    Carboguard 8922 LH is a versatile corrosion resistant coating. May be topcoated with itself, or a broad variety of high performance finish coats. Carboguard 8922 LH has surface tolerant properties. Specially formulated to meet current Federal guidelines for HAPS content.


  • Carboguard 893

    Features:

    • Excellent corrosion protection
    • Excellent film build and edge protection
    • Used as a primer or an intermediate coating
    • Good abrasion resistance
    • Cures down to 40°F (4°C)
    • VOC compliant to current AIM regulations

    Description:

    High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats.


  • Carboguard 893 SG

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Available in a variety of rapid tint colors
    • Attractive low sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Power tool cleaned surfaces acceptable
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. Carboline glass flake additive may be added to improve performance including internal strength, hardness, impact, and abrasion resistance. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties. Use optional (LT) cure for low temperature cure down to 35°F (1.7°C).


  • Carboguard 893 SG LT

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Available in a variety of rapid tint colors
    • Attractive low sheen for tank exteriors
    • Used as a primer, intermediate, or finish coat
    • Power tool cleaned surfaces acceptable
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating. Used either as a primer, intermediate coat, or self-priming finish over steel and zinc primers. May be topcoated with itself, or a broad variety of high performance finish coats. Product also has surface tolerant properties and low temperature 35 °F (2 °C) cure capability.


  • Carboguard 893 SG MIO

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Used as a primer or intermediate coat
    • Can be applied over power tool cleaned surfaces
    • Micaceous iron oxide (MiO Filler) for additional barrier properties and corrosion resistance: MiO is purchased separately
    • Optional low temperature (LT) cure Part B
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating with zinc phosphate corrosion inhibitor. Contains additional filler reinforcement (micaceous iron oxide) for enhanced barrier resistant properties. Used either as a primer or intermediate coat over steel, other epoxies or inorganic zinc primers. May be topcoated with a broad variety of high performance finish coats. Has surface tolerant properties. Has optional (LT) cure for 35°F cure capability.


  • Carboguard 893 SG Tank White

    Features:

    • Ready to apply after mixing; no sweat-in time or thinning required.
    • Economical fit for use epoxy
    • Self-chalking white color is maintained
    • Attractive long-term appearance
    • Versatile as a self-priming epoxy
    • VOC compliant to current AIM regulations

    Description:

    Versatile corrosion resistant coating used as an exterior weathering tank finish. It may be used over properly primed steel or can be used as a self-priming finish for mild to moderate exposures. Unique formulation initiates the desirable self-chalking properties and maintains the white appearance as the coating weathers.


  • Carboguard 893N

    Features:

    • Excellent corrosion protection
    • Excellent film build and edge protection
    • Used as a primer or an intermediate coating
    • Good abrasion resistance
    • VOC compliant to current AIM regulations
    • Tested for Nuclear Service Level 1

    Description:

    Nuclear grade, DBA tested, self priming epoxy. Tested and certified for use in Nuclear Level 1 areas in a variety of systems.


  • Carboguard 894

    Features:

    • Immersion- grade epoxy
    • High solids, low VOC
    • Excellent adhesion
    • Excellent flexibility
    • Long recoat window

    Description:

    Carboguard 894 is a high performance, versatile, immersion-grade, VOC compliant, high build, self-priming epoxy. It is suitable for industrial and marine environments in fresh or salt water immersion. It can also be used for tank exteriors, structural steel, piping, or process equipment. Carboguard 894 may be used on barges, vessels and other marine applications where a high quality epoxy is needed.


  • Carboguard 896

    Features:

    • Meets requirements of 21CFR 175.300

    Description:

    Carboguard 896 is a two component, high solids, modified epoxy formulated for use as a protective hopper lining with excellent resistance to fugitive acetic and hydrochloric acids often found in many plastic pellet cargoes.


  • Carboguard 901 FC

    Features:

    • As a single-coat, protective coating for a variety of uses including equipment, piping, structural steel, and tankage exposed to corrosive and/or abusive service.

    Description:

    Carboguard 901 FC is a solvent-free, two component, amine cured epoxy formulated for use as a direct-to-metal (DTM) exterior coating with excellent corrosion and chemical resistance. It has very fast dry to handle and cure properties making it desirable for shop applications.


  • Carboguard 904

    Features:

    • Exterior coating for railcars applied in one coat by plural component equipment.

    Description:

    Carboguard 904 is a two component, amine cured epoxy formulated for use as a direct-to-metal (DTM) exterior coating with excellent corrosion and chemical resistance.


  • Carboguard 954 HB

    Features:

    • Surface tolerant characteristics to existing finishes and SP2, SP3-cleaned steel
    • Single-coat application in most instances
    • High-build capability
    • Self-priming and primer/finish capabilities
    • Excellent abrasion and moisture resistance
    • True brush & roll characteristics
    • VOC compliant to current AIM regulations

    Description:

    All-purpose, high-build, solvent-free, spray, brush or roll epoxy mastic coating with applications in all industrial markets and for almost all substrates. Product has excellent wetting properties making it ideal for direct-to-substrate (steel or concrete) surface-tolerant applications.


  • Carboguard 992

    Features:

    • Single coat, high performance protection.
    • Low-to-no odor.
    • Easy to apply by plural component airless.
    • Meets FDA requirements of 21CFR 175.300.
    • Excellent chemical resistance.
    • Fast cure.
    • Tough, flexible, abrasion resistant.
    • Excellent corrosion protection.
    • Impact resistant.
    • Hi-build application in one coat.

    Description:

    Carboguard 992 is a solventless, epoxy lining for dry bulk cargoes that is applied by heated, airless plural component spray, as a one coat lining for hopper cars carrying plastic pellets, food and grain, or other dry cargoes. It is acceptable for direct contact with dry bulk food products.


  • Carboguard 995

    Features:

    • Flexible, solvent-free lining
    • Meets requirements of 21CFR 175.300
    • Single-coat application
    • Excellent flow and leveling

    Description:

    Carboguard 995 is a two component, 99% volume solids, amine cured epoxy formulated as a flexible, direct-to-metal (DTM) protective lining for railcars. Typical uses include dry bulk service for hopper cars carrying polyethylene, polypropylene or polystyrene plastic pellets.


  • Carbomastic 15

    Features:

    • Unique formulation with lamellar aluminum flakes for exceptional barrier protection
    • Excellent performance over minimal surface preparation of steel substrates
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Available in a low temperature cure version (Carbomastic 15 FC)
    • Suitable for use under insulation on hot surfaces operating up to 300 °F (150 °C)
    • VOC compliant to current AIM regulations

    Description:

    Aluminum pigmented, low-stress, high-solids mastic with a proven field history. This unique formulation incorporates lamellar aluminum pigment for superior barrier protection. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.


  • Carbomastic 15 FC

    Features:

    • Unique formulation with lamellar aluminum flakes for exceptional barrier protection
    • Excellent performance over minimal surface preparation of steel substrates
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • May be applied at 35°F (2°C) when CM 15 FC's part B is utilized
    • Suitable for use under insulation on hot surfaces operating up to 300°F(150°C)
    • VOC compliant to current AIM regulations

    Description:

    Aluminum pigmented, low-stress, high-solids mastic with a proven field history. This unique formulation incorporates lamellar aluminum pigment for superior barrier protection. Carbomastic 15 was the pioneer mastic coating in a number of industrial markets and today still provides unmatched levels of barrier protection and corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3-cleaned steel.


  • Carbomastic 18 BT

    Features:

    • Excellent immersion performance in both fresh and sea water
    • Suitable as a rust preventive coating in ballast tanks and hull applications
    • Ideal for sub-sea installations, jackets and other areas exposed to sea water
    • Can be applied as low as 5°C (40°F)
    • Good flexibility
    • Very good abrasion resistance
    • VOC compliant

    Description:

    Carbomastic 18 BT is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Offshore applications include sub-sea, jackets, production decks, drilling rig legs, pontoons, in immersed surfaces. It meets the demands in IMO Performance Standard for Protective Coatings. It is classified “B1” (Superior Grade) under DNV standard “Testing and Classification of Ballast Tank Coatings”.


  • Carbomastic 242

    Features:

    • Single coat application characteristics
    • Suitable as a topcoat for most tightly adhered existing coatings
    • Dry to handle in 24 hours at 20 °F (-7 °C)
    • Extended pot life at low temperatures
    • VOC compliant to current AIM regulations
    • Moisture curing capabilities in conjunction with cross-linking Epoxy

    Description:

    Aluminum-pigmented, low temperature curing mastic designed for cold weather applications down to 0 °F (-18 °C). This unique coating provides excellent corrosion resistance over existing finishes and rusted or SSPC-SP2 or SP3- cleaned steel.


  • Carbomastic 615

    Features:

    • High solids, low VOC
    • Low temperature cure
    • Excellent wetting properties
    • Excellent surface tolerance
    • Excellent moisture tolerance (application)
    • Continues to cure underwater
    • Fast cure response
    • Suitable for immersion service in fresh or salt water after 60 minutes cure @ 75°F

    Description:

    High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.


  • Carbomastic 615 AL

    Features:

    • Incorporates lamellar aluminum flakes to provide exceptional barrier protection
    • High solids, low VOC
    • Low temperature cure
    • Excellent wetting properties
    • Excellent surface tolerance
    • Excellent moisture tolerance after application
    • Fast cure response
    • Excellent choice for field touch-up of zinc-rich primers and galvanized steel
    • Suitable for immersion service in fresh or salt water after 2 hour cure @ 75°F

    Description:

    High performance, aluminum-filled epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding surface tolerance, low temperature cure capability, and very fast cure response for quick return to service. This lamellar aluminum-pigmented epoxy also contains inert flake reinforcement (micaceous iron oxide) to enhance film strength, barrier properties and overall performance.


  • Carbomastic 615 MC

    Features:

    • Low VOC < 100 g/l, high solids
    • Low HAPS 0.02 lbs./solid gallon
    • Excellent corrosion protection
    • Aluminum flakes and MIO provides exceptional barrier protection
    • Excellent wetting properties and adhesion
    • Outstanding tolerance to marginal surface preparation
    • Fast cure response for quick return to service
    • Cures for immersion service in fresh and salt water after 60 minutes @ 75°F
    • Low temperature cure
    • High dry film thickness (DFT)

    Description:

    High performance aluminum filled epoxy with inert flake reinforcement, micaceous iron oxide (MIO), to further enhance the film strength and performance. This low VOC, low HAPS coating provides excellent corrosion protection for substrates subjected to immersion service in fresh and salt water as well as typical industrial and marine environments. It has outstanding tolerance for marginal surface preparation. This coating cures very fast for quick return to service and also cures at low temperatures.


  • Carbomastic 90

    Features:

    • Very good performance over minimal surface preparation of steel substrates
    • Suitable as a tie-coat/topcoat for most tightly adhered existing coatings
    • Excellent film build on edges
    • Can be applied at temperatures as low as 40°F
    • VOC compliant to current AIM regulations

    Description:

    Economical, aluminum-pigmented mastic with excellent performance properties. Designed for a broad range of applications, this material provides good corrosion resistance, film build and surface tolerance. Can be applied at low temperatures and cures faster than many other epoxy mastics.


  • Carbomastic 94

    Features:

    • Surface tolerant epoxy mastic
    • Excellent corrosion protection
    • Low VOC
    • Custom colors available via RTS
    • Excellent wetting properties and adhesion
    • High solids, low stress over existing coatings
    • High film build, up to 7 mils DFT per coat
    • Class A Flame Spread and Smoke Development
    • Excellent durability
    • Good flexibility and impact resistance
    • Outstanding abrasion resistance
    • Good chemical resistance
    • Long pot life
    • Long maximum re-coat, up to 1 year
    • Approved topcoat over many Carboline Fireproofing Materials

    Description:

    A high performance, surface tolerant, high build, corrosion resistant epoxy mastic. It has outstanding adhesion to metal substrates along with most aged coatings and offers maximum protection against severe weather conditions, corrosion, moisture penetration and general industrial environments. It wets and penetrates firm rust and tight crevices and resists further rust deterioration. Use it on tank exteriors, structural steel, piping, process equipment, bridges & water towers. Carbomastic 94 may also be used for immersion in fresh or salt water (marine) exposures on barges, vessels and other marine applications. An optional micaceous iron oxide, (MIO), additive can be purchased separately and may be used per its Product Data Sheet to further enhance the coating's performance.


  • Carbomastic 94 MC

    Features:

    • Surface tolerant epoxy mastic
    • Excellent corrosion protection
    • Low VOC, passes Berkeley Analytical VOC Emissions Tests
    • Custom colors available via RTS
    • Excellent wetting properties and adhesion
    • High solids, low stress over existing coatings
    • High film build, up to 7 mils DFT per coat
    • Class A Flame Spread and Smoke Development
    • Excellent durability
    • Good flexibility and impact resistance
    • Outstanding abrasion resistance
    • Good chemical resistance
    • Long pot life
    • Long maximum re-coat, up to 1 year
    • Approved topcoat over many Carboline Fireproofing Materials

    Description:

    A high performance, surface tolerant, high build, corrosion resistant epoxy mastic. It has outstanding adhesion to metal substrates along with most aged coatings and offers maximum protection against severe weather conditions, corrosion, moisture penetration and general industrial environments. It wets and penetrates firm rust and tight crevices and resists further rust deterioration. Use it on tank exteriors, structural steel, piping, process equipment, bridges & water towers. Carbomastic 94 MC may also be used on barges, vessels and other marine applications. An optional micaceous iron oxide, (MIO), additive can be purchased separately and may be used per its Product Data Sheet to further enhance the coatings's performance.


  • Carboquick 200

    Features:

    • Fast cure speeds the painting process
    • High build, 6 to 10 mils DFT per coat
    • Excellent corrosion protection
    • Meets ISO 12944-6 C3 High, one coat applied DTM
    • Saves significant time, labor and money
    • Excellent weathering
    • Exceeds SSPC Coating Specification No. 39 Level 3A, highest level for aliphatic polyurea
    • Exceeds SSPC Coating Specification No. 36 Level 3A, highest level for aliphatic polyurethane
    • Very good flexibility and elongation
    • Excellent abrasion and impact resistance
    • Excellent wetting and adhesion
    • Extremely durable to help provide long service life
    • Low VOC and low HAPS
    • Suitable for use in USDA inspected facilities
    • Indefinite recoatability

    Description:

    This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 6 to 10 mils dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc, Carbomastic, or Carboguard primers.


  • Carboquick 201

    Features:

    • Fast cure with good pot life - speeds the painting process
    • High build, up to 10 mils DFT per coat
    • Can be applied direct to metal (DTM)
    • Excellent corrosion protection - ISO 12944-6 C3 Low, DTM; C5 High over Carbozinc 859
    • Excellent corrosion protection over phosphatized carbon steel - ISO 12944-6 C3 High
    • Excellent weathering - SSPC Ctg. Spec. No. 39 Level 3A (highest level)
    • 1 - 2 coats instead of 2 - 3 coats saves significant time, labor and money
    • Excellent durability - abrasion and impact resistant
    • Low VOC and low HAPS
    • Indefinite recoatability

    Description:

    This fast-cure, high-build polyaspartic coating provides good corrosion protection plus long term weatherability in just one coat. It can be applied direct to metal (DTM). For improved corrosion protection it can be applied over approved primers including Carbozinc 859. These 1 - 2 coat systems can eliminate the need for typical primers and/or intermediate coats to significantly speed up the painting process. Suitable for use in USDA inspected facilities.


  • Carbothane 133 HB

    Features:

    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Suitable for application direct to inorganic zincs
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 133 LH

    Features:

    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Outstanding performance properties in both mild and aggressive environments
    • High build; suitable for many two-coat systems
    • Application by spray, brush or roller
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Low HAPs content

    Description:

    High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.


  • Carbothane 133 LV

    Features:

    • High solids, high build, aliphatic polyurethane
    • Outstanding weathering properties
    • Quick dry to recoat and dry to handle times
    • Good resistance to corrosion and abrasion
    • Low VOC and low HAPs content
    • Low temperature cure down to 35°F
    • Satin to semi-gloss finish allows for easier field touch-up
    • Indefinite recoatability (no maximum recoat time)
    • Can be applied directly to zinc-rich primers (with a properly applied mist coat)

    Description:

    A high solids, high build, satin topcoat which provides a tough attractive finish and outstanding weathering properties. In addition, this low VOC & HAPs polyurethane demonstrates good resistance to abrasion and corrosion when applied over recommended Carboline primers and/or intermediate coats.


  • Carbothane 133 MC

    Features:

    • Outstanding performance properties in virtually all industrial markets
    • High build; suitable for many two coat systems
    • High solids formulation allows for improved edge protection
    • Suitable for application direct to inorganic and organic zinc primers
    • Indefinite recoatability
    • VOC compliant to 100 g/l VOC regulations

    Description:

    High solids, high build, weatherable coating that provides a tough attractive finish while exhibiting outstanding performance properties. Demonstrates extremely good resistance to abrasion, corrosion and chemical exposure when applied over recommended Carboline primers and/or intermediate coats.


  • Carbothane 133 VOC

    Features:

    • Compliant to AWWA D102-11, OCS-4 & OCS-6
    • Outstanding performance properties in virtually all industrial markets
    • High build; suitable for many two-coat systems
    • High solids formulation allows for improved edge protection
    • Suitable for application direct to inorganic and organic zinc primers
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Suitable for use in USDA inspected facilities
    • Suitable for use as a metalizing sealer*

    Description:

    High solids, high build, satin finish that provides a tough attractive finish while exhibiting outstanding performance properties. Demonstrates extremely good resistance to abrasion, corrosion and chemical exposure when applied over recommended Carboline primers and/or intermediate coats.


  • Carbothane 134 Clear Coat

    Features:

    • Hard finish with excellent impact and abrasion resistance
    • Excellent resistance to UV degradation
    • Attractive gloss finish
    • Suitable for airless, conventional spray or roller application
    • VOC compliant to current AIM regulations
    • Indefinite recoatability
    • Improves resistance to graffiti over traditional urethane topcoats
    • Suitable for use as a metalizing sealer*

    Description:

    A clear coat finish that provides added UV protection over pigmented Carboline polyurethanes. Exceptionally hard film and excellent depth-of-image provide extended service life to the Carbothane® topcoats, especially when deeptone and metallic colors are used.


  • Carbothane 134 GS

    Features:

    • Very good weathering (75% gloss retention after 4000 hours QUV-A exposure)
    • Exceeds SSPC-Paint Spec 36; Level 3
    • 6 hours dry to handle time
    • High gloss appearance
    • Brush, roll, or spray application
    • Indefinite recoatability
    • Minimum 2 hours working time

    Description:

    Carbothane 134 GS is an excellent weatherable finish for exterior exposures in industrial and marine environments. It has wide versatility as a high gloss aesthetically pleasing finish for a variety of exposures. It is an ideal topcoat over epoxy primers or intermediates to enhance appearance and longer term weathering characteristics.


  • Carbothane 134 HG

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Available in all Carboline colors including metallic-pigmented colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Meets the requirements of AWWA D 102 Outside Coating System (OCS) 5 & 6
    • Suitable for use in USDA inspected facilities
    • Meets the performance requirements of MIL-PRF-85285E Type II, Class H Polyurethane
    • Meets the performance requirements of UFGS 09 97 13.27 Polyurethane Topcoat

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 134 HG Aluminum

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Available in metallic-pigmented colors
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.


  • Carbothane 134 HS

    Features:

    • Excellent weatherability
    • Excellent flexibility
    • Excellent abrasion resistance
    • Available in Carboline’s Rapid Tint System
    • Meets most VOC requirements
    • Indefinite recoatability

    Description:

    An attractive, high gloss, high solids topcoat which is easily applied by airless or conventional spray to yield a smooth, easily cleanable surface. Recommended use as a finish coat for the exteriors of tanks, equipment, piping, structural steel, and concrete surfaces where chemical resistance, toughness, and weatherability are required. An excellent coating for use in chemical processing, pulp and paper, petro-chemical, bridge, offshore, railcars, heavy marine, institutional and waste treatment facilities where a highly resistant and attractive coating is desired. Not recommended for immersion service.


  • Carbothane 134 MC

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to 100 g/l VOC regulations
    • Approved MPI #72

    Description:

    High gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, provides a smooth, durable finish that has superior resistance to corrosion and chemical exposure.


  • Carbothane 134 VOC

    Features:

    • High solids, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Excellent flow characteristics allow for application by spray or roller
    • Superior impact and abrasion resistance
    • Indefinite recoatability
    • VOC compliant to current AIM regulations
    • Meets the requirements of AWWA D 102 Outside Coating Systems (OCS) 5 & 6
    • Suitable for use in USDA inspected facilities

    Description:

    High gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, provides a smooth, durable finish that has superior resistance to corrosion and chemical exposure.


  • Carbothane 134 WB

    Features:

    • Water based, low VOC content
    • Excellent weatherability
    • Exceeds SSPC Paint 36 specification for a Level 3 urethane
    • Suitable for USDA inspected facilities
    • Available in most Carboline and custom colors
    • Excellent flow characteristics allow for application by spray or roller
    • Flexible, impact and abrasion resistant film
    • Indefinite recoatability
    • VOC compliant to current AIM regulations

    Description:

    Thin film, high gloss finish with exceptional weathering performance characteristics. Used for the weathering protection of a variety of substrates in all architectural and industrial markets. It provides a smooth, durable finish that has excellent weathering resistance, gloss and color retention..


  • Carbothane 8812

    Features:

    • VOC compliant – 3.3 pounds per gallon as supplied
    • Direct-To-Metal (DTM)
    • Fast Dry – 6-8 hours to handle at 75°F
    • High build, high gloss
    • Excellent abrasion resistance
    • Application by conventional, airless spray, HVLP or electrostatic
    • Excellent chemical resistance
    • Ambient air or force cure with conventional or infrared ovens
    • Suitable for use in USDA inspected facilities

    Description:

    Carbothane 8812 is a fast dry, high gloss, high build, two component polyurethane coating. Carbothane 8812 exhibits the excellent dry times and handling characteristics required by Original Equipment Manufacturers. This coating has outstanding hardness, adhesion and resistance to: impact, marring, abrasion, chemicals and staining. Carbothane 8812 is recommended as a direct to metal finish coat or as a finish coat over properly primed substrates. Typical applications include air compressors, propane tanks, trailer chassis and frames, valves, pumps, waste water treatment plant equipment, agricultural equipment, hazardous material storage buildings and general industrial equipment. Not recommended for continuous immersion service.


  • Carbothane 8815

    Features:

    • VOC compliant
    • Direct-To-Metal (DTM)
    • Very Fast Dry
    • High build, high gloss
    • Excellent abrasion resistance
    • Application by conventional or airless spray, HVLP, Electrostatic or plural component spray
    • Excellent chemical resistance
    • Ambient air or force cure with conventional or infrared ovens
    • Suitable for USDA inspected facilities

    Description:

    A fast dry, high gloss, high build, two component polyurethane coating. Carbothane 8815 exhibits the excellent dry times and handling characteristics required by Original Equipment Manufacturers. This coating has outstanding hardness, adhesion and resistance to: impact, marring, abrasion, chemicals and staining. Carbothane 8815 is recommended as a direct to metal finish coat or as a finish coat over properly primed substrates.


  • Carbothane 8832

    Features:

    • Low VOC – 2.8 pounds per gallon as supplied
    • Low HAPS
    • Direct-To-Metal (DTM)
    • Very Fast Dry – 90-120 minutes to handle at 75°F (24°C)
    • High build, high gloss
    • Application by conventional or airless spray, HVLP, Electrostatic or plural component spray
    • Ambient air or force cure with conventional or infrared ovens
    • Meets ISO 12944 C3 Medium

    Description:

    Carbothane 8832 is a fast dry, high gloss, high build, two component polyurethane coating. Carbothane 8832 exhibits the excellent dry times and handling characteristics required by Original Equipment Manufacturers. This coating has outstanding hardness, adhesion and resistance to impact, marring, abrasion and staining. Carbothane 8832 is recommended as a direct to metal finish coat or as a finish coat over properly primed substrates. Typical applications include air compressors, propane tanks, trailer chassis and frames, valves, pumps, waste water treatment plant equipment, agricultural equipment, hazardous material storage buildings and general industrial equipment. Not recommended for continuous immersion service.


  • Carbothane 8845

    Features:

    • VOC compliant – 1.9 lbs/gal (228 g/l) as supplied
    • Direct-To-Metal (DTM)
    • 6 hours to handle at 75 °F (24 °C)
    • High solids, high build, high gloss
    • Excellent abrasion resistance
    • Application by conventional, airless spray, HVLP or electrostatic
    • Excellent chemical resistance
    • Ambient air or force cure with conventional or infrared ovens
    • Suitable for USDA inspected facilities

    Description:

    Carbothane 8845 is a fast dry, high solids, low VOC, high gloss, high build, two component polyurethane coating. Carbothane 8845 exhibits the excellent dry times and handling characteristics required by Original Equipment Manufacturers. This coating has outstanding hardness, adhesion and resistance to: impact, marring, abrasion, chemicals and staining. Carbothane 8845 is recommended as a direct to metal finish coat or as a finish coat over properly primed substrates. Typical applications include air compressors, propane tanks, trailer chassis and frames, valves, pumps, waste water treatment plant equipment, agricultural equipment, hazardous material storage buildings and general industrial equipment. Not recommended for continuous immersion service.


  • Carbothane Clear Coat (Satin)

    Features:

    • Hard finish with excellent impact and abrasion resistance
    • Excellent resistance to UV degradation
    • High gloss version provides very good depth of image
    • Attractive gloss and satin finishes
    • Suitable for conventional spray or roller application
    • VOC compliant to current AIM regulations

    Description:

    A clear coat finish that provides added UV protection over pigmented Carboline polyurethanes. Exceptionally hard film and excellent depth-of-image provide extended service life to the Carbothane topcoats, especially when deeptone and metallic colors are used.


  • Carbotherm 3300

    Features:

    • Excellent thin-film insulation
    • Unique formula provides superior coverage during application
    • Protects personnel from hot surfaces
    • Multi-purpose interior/exterior coating
    • Insulation provides anti-condensation properties
    • Easy to use
    • Zero VOC; Low odor
    • May be applied to hot surfaces

    Description:

    Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment.


  • Carbotherm 551

    Features:

    • Excellent thin-film insulation
    • Unique epoxy formula outperforms acrylic-based materials
    • Tougher and more durable than acrylic coatings
    • Higher chemical resistance than acrylic coatings
    • Topcoats are optional
    • Protects personnel from hot surfaces
    • Ideal for industrial/aggressive applications
    • Insulation provides anti-condensation properties
    • Acceptable for use in USDA facilities
    • High film build per coat; fewer coats
    • Low VOC; low odor
    • May be applied to hot surfaces

    Description:

    Carbotherm 551 is a unique insulative composite coating formulated in a high temperature resistant epoxy binder. Unlike acrylic-based insulative materials it has superior toughness, hardness, impact resistance, chemical resistance and permeation resistance. It is therefore more suitable for industrial applications or other physically demanding environments. It is an ideal protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate condensation of pipes or other operating equipment. Its superior application properties of higher film build per coat and fewer coats offers savings and quicker return to service. Because it bonds directly to the surface (unlike standard insulation materials) it minimizes water entry and the effect of corrosion under insulation.


  • Carbotherm 730

    Features:

    • Provides total submersion and splash and spill cryogenic protection
    • Resistant to moisture and chemical exposure
    • Excellent spray properties
    • Can be applied by plural component airless spray, trowel or casting
    • High film build

    Description:

    An insulative coating designed to provide cryogenic protection for structural steel, vessels, piping and ductwork operating at temperatures between -40°F (-40°C) and 175°F (79°C). This product can be utilized as a base coat with Carboline fireproofing materials to provide combined insulation and fire protection to substrates exposed to a cryogenic spill followed by a hydrocarbon fire.


  • Carbotherm 731

    Features:

    • Thermal protection up to 302°F (150°C)
    • Provides total submersion and splash and spill cryogenic protection
    • Resistant to moisture and chemical exposure
    • Excellent spray properties
    • Can be applied by plural component airless spray, trowel or casting
    • High film build

    Description:

    An insulative coating designed to provide thermal protection for structural steel, vessels, piping and ductwork with continuous operating temperatures between -40°F (-40°C) and 302°F (150°C). This product can be utilized as a base coat with Carboline fireproofing materials to provide combined insulation and fire protection.


  • Carboweld 11

    Features:

    • Welds made over Carboweld 11 coated steel are equal in every respect to welds made to uncoated steel
    • Designed to protect steel during construction phase of projects under normal conditions
    • Can be topcoated for additional long term protection for atmospheric exposures.
    • Weld spatter does not adhere to or damage the coating
    • Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld
    • Dries to touch and to handle in 3 to 5 minutes
    • Certified as a pre-construction primer for Lloyds Register constructions

    Description:

    A weldable pre-construction inorganic zinc primer for shop use only.


  • Carboweld 17 FG

    Features:

    • Weldable, pre-construction primer
    • Cathodic protection mechanism
    • Excellent undercutting resistance
    • ABS Certified to IMO/PSPC Standard
    • Certified as a pre-construction primer for Lloyds Register constructions

    Description:

    Carboweld 17 FG is a fast drying, 2 component, zinc rich primer designed for the prefabrication priming of steel for marine, coastal and demanding industrial environments. It is a weldable, hard, abrasion resistant primer that provides cathodic protection. Use it to protect steel on marine vessels and off-shore structures during construction and in areas where welding, heat resistance, impact and abrasion resistance are necessary. It has been tested by DNV and certified by ABS to the IMO/PSPC standard for ballast tank linings.


  • Carbowrap Marine Paste

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack

    Description:

    Carbowrap Marine Paste is a preparatory priming paste used to displace surface moisture, passivates surface oxides and fills small irregularities in the substrate. It consists of saturated petroleum based compound and passivating agents. Marine Paste is a special primer paste that contains wide spectrum biocides. Carbowrap Marine Paste is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Marine Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Marine Tape

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/in
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours
    • Service Temperature: 131 °F (55 °C)

    Description:

    Carbowrap Marine Tape is a non-woven bonded synthetic fabric, fully impregnated and coated with natural petroleum based compounds and inert fillers. It is chemically inert, does not polymerize or oxidize, retains water resistance and dielectric properties over an indefinite period, and contains a highly effective anti-bacterial agent to protect the substrate from microbial corrosion activities. This tape is designed for application underwater, near the splash zone, or on substrates in a corrosive marine environment. Carbowrap Marine Tape is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Marine Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Mastic

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/inch
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours

    Description:

    Carbowrap Mastic is afiller which profiles areas to be wrapped by easing contours on pipe joints, flanges, valves, bolts, and other irregular shapes. Consists of saturated petroleum based compounds, inert fillers, and reinforcing fibers. Carbowrap Mastic is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Overwrap

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack

    Description:

    Carbowrap Overwrap A stabilized, plasticized, PVC film coated with an anti-corrosive pressure sensitive adhesive used to wrap over petrolatum tapes to provide colorcoding and additional protective properties. It is flexible, resists acids, alkalies, and oils. Carbowrap Overwrap is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Paste

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack

    Description:

    Carbowrap Paste is a preparatory priming paste used to displace surface moisture, passivates surface oxides and fills small irregularities in the substrate. It consists of saturated petroleum based compound and passivating agents. Carbowrap Paste is a special primer paste that contains wide spectrum biocides. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowrap Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Tape A

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/inch
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours
    • Service Temperature: 131 °F (55 °C)

    Description:

    Carbowrap Tape is a non-woven bonded synthetic fabric, fully impregnated and coated with natural petroleum based compounds and inert fillers. It is chemically inert, does not polymerize or oxidize, and retains water resistance and dielectric properties over an indefinite period. Three different tapes are available depending on the service temperatures (130 °F [54 °C], 150 °F [66 °C], and 165 °F [74 °C] respectively). Carbowrap Tape is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carbowrap Tape C

    Features:

    • Contain no VOC's
    • Resists harsh chemical exposures
    • Will not crack or harden over time
    • Application in any weather
    • Provides an impermeable protective layer
    • No special tools required for application
    • Complies with AWWA C217 specification
    • Provides excellent protection against chemical splash or fume attack
    • Tensile Strength: 45 lbs/inch
    • Water Vapor Permeability: 0.12 g/m2 per 24 hours
    • Service Temperature: 167 °F (75 °C)

    Description:

    Carbowrap Tape is a non-woven bonded synthetic fabric, fully impregnated and coated with natural petroleum based compounds and inert fillers. It is chemically inert, does not polymerize or oxidize, and retains water resistance and dielectric properties over an indefinite period. Three different tapes are available depending on the service temperatures (130 °F [54 °C], 150 °F [66 °C], and 165 °F [74 °C] respectively). Carbowrap Tape is part of the Carbowrap system developed for the protection of metal surfaces in severe environments and difficult to protect applications. The Carbowrap System is designed to be applied over hand or power wire brushed surfaces for above ground, buried, and underwater applications. The typical system involves priming the surface with a paste (Carbowarp Paste), profiling around irregular shapes with a mastic compound (Carbowrap Mastic), and wrapping with a petroleum tape (Carbowrap Tape A, B, C or Marine Tape). An optional overwrap tape (Carbowrap Overwrap) is used for additional mechanical or electrical resistance.


  • Carboxane 2000

    Features:

    • Isocyanate free
    • Exceptional weatherability
    • Outstanding color and gloss retention
    • Exceeds SSPC Coating Specification No. 36 Level 3A
    • Excellent corrosion protection
    • Meets ISO 12944 C3 High and C4 Medium, one coat applied at 5 to 7 mils DFT
    • High build, 3 to 7 mils DFT
    • Saves significant time, labor, and money
    • Long service life
    • VOC compliant
    • Excellent durability
    • Good flexibility and abrasion resistance
    • Long pot life

    Description:

    Carboxane 2000 is an isocyanate free, ultra-durable coating that provides outstanding color and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance. This tightly cross-linked film utilizes a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.


  • Carboxane 2000 Satin

    Features:

    • Isocyanate free
    • Exceptional weatherability
    • Outstanding color and gloss retention
    • Exceeds SSPC Coating Specification No. 36 Level 3A
    • Excellent corrosion protection
    • Meets ISO 12944 C3 High and C4 Medium, one coat at 5 to 7 mils DFT
    • High build, 3 to 7 mils DFT
    • Saves significant time, labor, and money
    • Long service life
    • VOC compliant
    • Excellent durability
    • Good flexibility and abrasion resistance
    • Class A Flame Spread (ASTM E84)
    • Long pot life

    Description:

    Carboxane 2000 Satin is a premium, ultra-durable coating that provides outstanding color and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 Satin provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labor, and saves money without sacrificing performance.


  • Carboxane 950 Clear Gloss

    Features:

    • Ambient temperature cure; no heat cure required
    • Meets AAMA 605.2 requirements (industry standard for PVDF finishes)
    • Exceptional weatherability
    • Excellent flow characteristics allow for application by spray or roller
    • Excellent graffiti resistance
    • Enhances long term performance over pigmented or metallic finishes

    Description:

    Premium, ultra-durable ambient cured clear coat finish meeting AAMA 605.2 performance requirements. This high gloss coating provides unparalleled color and gloss retention and exterior weathering characteristics. It offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.


  • Carboxane 950 Clear Satin

    Features:

    • Ambient temperature cure; no heat cure required
    • Meets AAMA 605.2 requirements (industry standard for PVDF finishes)
    • Exceptional weatherability
    • Available in a variety of Carboline colors
    • Excellent flow characteristics allow for application by spray or roller
    • Excellent graffiti resistance
    • VOC compliant to current AIM regulations

    Description:

    Premium, ultra-durable ambient cured finish meeting AAMA 605.2 performance requirements. 950 is a VOC-compliant coating that provides unparalleled color and gloss retention and exterior weathering characteristics. Available in gloss and satin finishes as well as metallic finishes with clear coats, 950 offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.


  • Carboxane 950 Satin

    Features:

    • Ambient temperature cure; no heat cure required
    • Meets AAMA 605.2 requirements (industry standard for PVDF finishes)
    • Exceptional weatherability
    • Available in a variety of Carboline colors
    • Excellent flow characteristics allow for application by spray or roller
    • Excellent graffiti resistance
    • VOC compliant to current AIM regulations

    Description:

    Premium, ultra-durable ambient cured finish meeting AAMA 605.2 performance requirements. 950 is a VOC-compliant coating that provides unparalleled color and gloss retention and exterior weathering characteristics. Available in gloss and satin finishes as well as metallic finishes with clear coats, 950 offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.


  • Carboxane 950 VOC

    Features:

    • Performance upgrade for AWWA D102-11, OCS-4
    • Meets performance requirements of AAMA 2604 (industry standard for PVDF finishes)
    • Exceptional color and gloss retention
    • Available in a variety of Carboline colors
    • Excellent flow characteristics allow for application by spray or roller
    • VOC compliant to current AIM and OTC regulations
    • Ambient temperature cure

    Description:

    Premium, ultra-durable ambient cured finish meeting AAMA 2604 performance requirements. 950 VOC is a VOC-compliant coating that provides unparalleled color and gloss retention and exterior weathering characteristics. Available in gloss and satin finishes as well as metallic finishes with clear coats, 950 VOC offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.


  • Carbozinc 11

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure. Dry to handle in 45 minutes at 60°F (16°C) and 50% relative humidity
    • Low temperature cure down to 0°F (-18°C)
    • High zinc loading
    • Meets FDA requirements
    • Zinc supplied meets ASTM D520 (Type II)*
    • Meets SSPC Paint 20 Type I, Level 1 for zinc content
    • Very good resistance to salting
    • May be applied with standard airless or conventional spray equipment
    • VOC compliant in many areas
    • Approved MPI #19

    Description:

    Time-tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.


  • Carbozinc 11 FC

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure.Dry to handle in 30 minutes at 75°F (24°C) and 60% RH
    • Can be topcoated in 4-5 hours at 75°F/24°C and minimum 60% RH
    • High zinc loading
    • Tolerant to mudcracking (up to 6 mils/150 microns)
    • Smooth uniform texture reduces topcoat bubbling
    • Meets FDA requirements in gray color
    • Very good resistance to salting
    • May be applied with standard airless or conventional spray equipment
    • Low HAPs content of 0.12 lbs/solid gallon

    Description:

    Time-tested corrosion resistant technology that protects steel galvanically in the harshest environments. For over five decades, Carbozinc 11 Series primers have been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Carbozinc 11 FC is a faster-cure formulation that allows fast topcoating times making it ideal for quick turn around projects.


  • Carbozinc 11 HS

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to handle in 1 hour at 75°F (24°C) and 50% relative humidity
    • Low temperature cure down to 15°F (-9°C)
    • High zinc loading
    • Very good resistance to salting
    • May be applied with airless or conventional spray
    • Excellent as a lining for solvent storage
    • May be used as a weldable pre-construction primer
    • Exhibits long-term corrosion resistance
    • Ultra-low VOC level for solvent-based inorganic zincs

    Description:

    Ultra-low VOC member of the Carbozinc family with extraordinary corrosion resistance properties. Carbozinc 11 HS combines unparalleled performance characteristics with an ultra-low VOC formulation that meets some of the most stringent VOC restrictions.


  • Carbozinc 11 HSN

    Features:

    • Meets specific design criteria for nuclear Level 1 use
    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to handle in 1 hour at 75°F (24°C) and 50% relative humidity
    • Low temperature cure down to 15°F (-9°C)
    • High zinc loading
    • Available in Type III (ASTM D520) zinc dust
    • Very good resistance to salting
    • May be applied with standard airless or conventional spray equipment
    • VOC compliant to current AIM regulations

    Description:

    Ultra-low VOC member of the Carbozinc family with extraordinary performance characteristics. Carbozinc 11 HSN combines unparalleled performance properties with a 2.4 lbs/gallon (unthinned) and 2.7 lbs/gallon (thinned) formulation that meets even the most stringent VOC restrictions. This primer is nuclear-qualified and suitable for use as a primer for steel substrates in Level 1 containment exposures under specific design criteria. Determine applicability prior to use.


  • Carbozinc 11 SG

    Features:

    • Excellent corrosion and weathering protection.
    • High zinc loading per square foot.
    • Very good resistance to salting.
    • Meets nuclear requirements for level one areas.
    • Available in Type III (ASTM D520) zinc dust.

    Description:

    An inorganic zinc rich primer that protects steel galvanically, eliminating sub-film corrosion.


  • Carbozinc 11 VOC

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.
    • Rapid cure. Dry to handle in 1 hour at 75°F (24°C) and 50% relative humidity.
    • Low temperature cure down to 0°F (-18°C).
    • High zinc loading.
    • Approved for MPI #19.
    • Meets FDA requirements.
    • Zinc supplied meets ASTM D520, Type II.*
    • Meets SSPC Paint 20 Type I, Level 1 for zinc content.
    • Very good resistance to salting.
    • May be applied with standard airless or conventional spray equipment.
    • VOC compliant in most areas.

    Description:

    Time -tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide. Carbozinc 11 VOC is simply a lower VOC version of the original Carbozinc 11 with VOC of 389 g/l as supplied.


  • Carbozinc 11 WB

    Features:

    • Excellent corrosion protection
    • High zinc loading per square foot
    • Zero VOC
    • Good resistance to salting
    • Fast curing, quick handling
    • Weldable version available Carboweld 11 WB
    • Excellent application characteristics (less likely to pump packing or tip plug)
    • Meets Class B slip coefficient and creep testing criteria for use on faying surfaces.

    Description:

    Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats.


  • Carbozinc 12 VOC

    Features:

    • Excellent corrosion protection.
    • Available in ASTM D520, Type II zinc version.
    • Outstanding application properties.
    • Accepts a variety of topcoats.
    • Less than 3.5 lbs./gal VOC.
    • VOC compliant.
    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces.

    Description:

    A high solids, inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations regarding metal filled coatings while providing the proven performance of alkyl silicate zinc rich technology. Recommended where long term corrosion resistance and undercutting corrosion protection is desired. Typical applications include steel bridges, structural steel and tanks where abrasive blasting can be used in surface preparation. Provides outstanding corrosion protection with or without topcoats in typical weathering and marine environments.


  • Carbozinc 18 WB

    Features:

    • Outstanding corrosion protection
    • Zero VOC
    • Outstanding undercutting resistance
    • High zinc content
    • Permanent protection

    Description:

    Carbozinc 18 WB is a fast drying, high zinc content, coating for steel substrates. It has outstanding performance in demanding corrosive environments. It self heals to continue protection when damaged. It provides cathodic sacrificial protection and thus prevents corrosion of the underlying steel, like galvanizing. It contains 90% zinc dust by weight in the dried film. This waterborne product has no VOC or flash point. Use in industrial, marine, and process environments.


  • Carbozinc 585

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces up to 3 mils dry (See "Dry Film Thickness Section")
    • Excellent corrosion resistance
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Applies easily by spray methods
    • Meets SSPC Paint 20; Level 1
    • Excellent touch-up primer by brush or roller for small areas.
    • VOC compliant and low odor
    • Unlimited recoat

    Description:

    Low VOC, zinc-rich epoxy primer for steel substrates that provides excellent corrosion resistance. Carbozinc 585 has very low VOC values, is low odor and easy to apply. It can be used in virtually all industrial markets.


  • Carbozinc 621

    Features:

    • Meets Class A slip co-efficient and creep testing criteria for use on faying surfaces
    • High level of zinc
    • Excellent adhesion and weathering
    • Excellent resistance to undercutting corrosion and abrasion resistant
    • Excellent application properties
    • May be topcoated in 4 hours at 75°F (24°C)
    • Tough durable film
    • Available in ASTM D520, Type II zinc version
    • VOC compliant to current AIM regulations

    Description:

    A two component moisture cured organic zinc primer for protection of steel in salt and weathering environments. Excellent maintenance or general use zinc primer over commercially blasted steel. Use as a shop primer where quick recoat and cure times are required, for field touch-up of inorganic zinc primers and for structural steel, tank exteriors, pipes and equipment in conjunction with corrosion resistant topcoats.


  • Carbozinc 808

    Features:

    • Rapid cure. Dry to recoat in 90 minutes at 75°F (24°C) and 50% relative humidity.
    • Low temperature cure down to 35°F (2°C)
    • Meets Class A slip co-efficient and creep testing criteria for use on faying surfaces
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Supplied as ASTM D520, Type II zinc
    • VOC compliant to current AIM regulations

    Description:

    A corrosion resistant, zinc containing primer with special reinforcing fillers. Carbozinc 808 is an excellent corrosion resistant, low VOC, fast cure to- topcoat primer with quick turnaround features for shop or field use. It can be used in moderate to corrosive applications for architectural, marine, and industrial markets.


  • Carbozinc 85

    Features:

    • High zinc loading
    • Excellent corrosion protection
    • Low VOC
    • Easy two-component mixing

    Description:

    Carbozinc 85 is a two component, polyamide, organic zinc filled coating designed to provide cathodic protection to steel in environments exposed to marine and industrial environments with severe weather and chemical fumes. Provides superior corrosion protection from undercutting. Excellent for use on structural steel, petrochemical applications, pulp and paper mills, bridges, piping, tanks, sewage treatment plants, electrical generating plants, and marine applications. Carbozinc 85 is QPL Approved under MIL-DTL-24441D for MIL-DTL-24441/19C, F-159 Type III; when manufactured at the registered location.


  • Carbozinc 858 (3K)

    Features:

    • Protects steel galvanically
    • Outstanding application properties
    • Cures at low temperatures down to 35°F(2ºC)
    • Tough and abrasion resistant film
    • Wide use in severe industrial or marine environments

    Description:

    A high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. This low VOC, HAPs compliant primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround capabilities for the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.


  • Carbozinc 858 DOT

    Features:

    • Meets SSPC Paint System 20
    • Low temperature cure down to 35°F (2°C)
    • Protects against undercutting corrosion
    • Available in ASTM D520, Type III zinc version
    • May be applied with standard airless or conventional spray equipment
    • VOC compliant to current AIM regulations

    Description:

    Low VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 DOT has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications.


  • Carbozinc 859

    Features:

    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity.
    • Complies with SSPC Paint 20 (Type II)
    • Low temperature cure down to 35°F (2°C)
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Field proven primer that applies well by spray methods
    • Excellent touch-up primer by brush or roll for small areas.
    • VOC compliant to current AIM regulations
    • Approved for MPI #20

    Description:

    Low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 has less than 3 lbs/gallon (359.5 g/l) VOC (thinned) and is used extensively in virtually all industrial markets.


  • Carbozinc 859 VOC

    Features:

    • Rapid cure. Dry to recoat in 30 minutes at 75°F (24°C) and 50% relative humidity.
    • Complies with SSPC Paint 20 (Type II)
    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces up to 3 mils dry (See "Dry Film Thickness" section)
    • Low temperature cure down to 35°F (2°C)
    • Excellent adhesion
    • Protects against undercutting corrosion
    • Available in ASTM D520, Type II zinc version
    • Field proven primer that applies well by spray methods
    • Excellent touch-up primer by brush or roll for small areas.
    • Extremely low VOC (less than 100 g/l)
    • Low HAPS (0.51 lbs/solid gal)

    Description:

    Ultra-low VOC organic zinc epoxy steel primer with extremely fast cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 859 VOC has less than 100 g/l VOC (thinned) and can be used in virtually all industrial markets.


  • Carbozinc 861

    Features:

    • Excellent application properties
    • Low temperature cure down to 35°F (2°C)
    • 90% zinc dust in the dry film
    • Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
    • Quick topcoatability
    • Meets most VOC regulations
    • Excellent adhesion
    • Protects against undercutting corrosion

    Description:

    A high solids, organic zinc primer with high zinc loading for the protection of steel substrates in salt or weathering environments. Used as a maintenance or general use primer over commercially blasted steel. Used for structural steel and equipment in pulp and paper, petrochemical, chemical processing and other severe environments with appropriate topcoat.


  • Carbozinc 8701

    Features:

    • Excellent application properties
    • Tough abrasion resistant film
    • Excellent adhesion & undercutting resistance
    • Superior corrosion resistance
    • Meets VOC (Volatile Organic Content) regulations
    • Fast drying for quick recoating

    Description:

    A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. This product can be applied by conventional or airless spray. Recommended for Original Equipment Manufacturers where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include marine, offshore drilling equipment, truck trailer chassis, underbodies and related equipment, industrial and off-road machinery, electrical transformers, industrial tanks, vessels, pumps and processing equipment.


  • Carbozinc 8703 (ASTM III)

    Features:

    • Welds made over Carbozinc 8703 coated steel are equal in every respect to welds made to uncoated steel.
    • Designed to protect steel during construction phase of projects under normal conditions.
    • Can be topcoated for additional long term protection for atmospheric exposures.
    • Weld spatter does not adhere to or damage the coating.
    • Can be welded as quickly and easily as bare steel at production line speeds without loss in strength or consistency of the weld.
    • Dries to touch and to handle in 3 to 5 minutes.
    • Utilizes Type III ultra pure, low-lead, zinc filler
    • Certified for potable water use under ANSI/NSF Standard 61 by Underwriters Laboratories (grey 0700 only)
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

    Description:

    Carbozinc 8703 may be used as a pre-construction primer, holding primer, or as a weldable steel primer for immersion service applications requiring ANSI/NSF 61 approval.


  • C-FLEX 45

    Features:

    • High-copper ablative protection
    • Smooth polishing finish
    • Compatible over most bottom paints
    • VOC compliant
    • Meets current IMO standards as a TBT-Free and Cybutryne-Free Anti-Fouling System

    Description:

    A multi-season antifouling that combines controlled polishing ablative technology with a high copper content to provide a paint film strong enough to handle the tough marine environment from coast to coast. It provides long term protection and fuel efficiency in harsh marine environments.


  • Coating Disbonder 8512

    Features:

    • Practical to use when traditional coating removal methods such as abrasive blasting or power tool cleaning cannot be performed due to environmental or health concerns
    • Well-suited to remove thick-film elastomers such as polyurethanes and polyureas.
    • Is often a more economical removal method over abrasive blasting

    Description:

    A single component, water-based coating which is designed to remove thick-film elastomers from steel substrates.


  • CZ (WB) Neutralizing Solution

    Features:

    • Water-based, biodegradable
    • Easy to use
    • Prepares water-based inorganic zincs for topcoating

    Description:

    Carbozinc (water based) Neutralizing Solution is an organic and biodegradable product designed specifically for use with Carbozinc and Carboweld water-based, inorganic primers, including: Carbozinc 11 WB Carbozinc 18 WB Carboweld 9 WB Carboweld 11 WB Carboweld 14 WB It is an environmentally safe product that will clean, neutralize (lower the surface pH), and degrease the waterbased Carbozinc/weld primers for topcoating. This product does not contain any bleach, chlorinated solvents, phosphates, muriatic or ozone depleting ingredients.


  • Firefilm IV

    Features:

    • Designs for interior space
    • Smooth, decorative finish
    • Dust free surface
    • Durable finish
    • Fast recoat, increased production
    • Extremely low VOC content
    • LEED compliant
    • Extensive outgas testing for controlled cleanroom and sterile environments

    Description:

    A decorative thin film intumescent coating designed for the fire protection of interior steel columns for up to a 3 hour fire rating, depending on the design.


  • FP-Fiberglass Mesh

    Features:

    Description:

    FP-Fiberglass Mesh is a high strength fiberglass reinforcing mesh designed for use with Thermo-Lag® intumescent fireproofing products.


  • Galoseal WB

    Features:

    • Single component
    • Low odor, low VOC
    • Contains no heavy metals or mineral acids
    • Extended recoat time
    • Accepts two-component solvented coatings
    • Fast dry to topcoat
    • Approved MPI #134

    Description:

    Water-based acrylic primer used to promote adhesion over galvanized and other nonferrous metal substrates. Unique formula has very low VOC and can be top coated with two-component solvented epoxies and polyurethanes.


  • High Temp Mesh

    Features:

    Description:

    High Temp Mesh is an open leno weave, 99+% carbon content, high temperature mesh used as a reinforcing media with Thermo-Lag®, Pyroclad® and Thermo-Sorb® intumescent fireproofing products. The mesh is supplied with a coated finish to enhance handling.


  • Hydroplate 1080

    Features:

    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600*
    • Conforms to multiple AWWA D102 ICS systems
    • One coat application - Up to 20 mils in a single coat
    • Excellent moisture tolerance during application
    • Low-temperature cure (20 °F)
    • Superior corrosion resistance in potable water immersion
    • Low VOC

    Description:

    High performance immersion grade epoxy specifically designed for water storage and treatment. High solids formulation provides superior edge retention and corrosion resistance. Meets the requirements of various AWWA standards making it ideal for use on numerous treatment, storage, and conveyance assets.


  • Hydroplate 1086

    Features:

    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600*
    • Meets the requirements of AWWA C210
    • Conforms to multiple AWWA D102 ICS and OCS systems
    • Low VOC and HAPs
    • Suitable for service in moderate wastewater environments
    • Excellent thermal shock resistance
    • Good abrasion resistance
    • Suitable for use in SCAQMD restricted areas

    Description:

    High solids epoxy used as a lining and exterior coating for potable water and wastewater assets. The advanced formula provides ultimate corrosion protection in a high solids coating that has tremendous ease of application properties. Product is self-priming and is frequently applied to steel, concrete, and ductile iron substrates.


  • Hydroplate 1100

    Features:

    • Certified by UL to meet NSF/ANSI/CAN 61 and NSF/ANSI/CAN 600*
    • Conforms to multiple AWWA D102 ICS 3
    • Batch mix formulation, single-leg airless spray
    • High impact resistance
    • Superior adhesion properties
    • Excellent abrasion resistance and flexibility
    • Can be applied down to 35 °F (2 °C)
    • Can be applied as a single or multi-coat system
    • Non-blushing with a extended recoat window
    • Fast return to service for potable water application

    Description:

    This product is a proprietary high performance epoxy coating designed as an internal tank, valve, fitting, and pipe lining for the water and wastewater markets. It has a unique blend of resins and curing agents that allow batch mixing, eliminating the need for plural component spray equipment. This blush-resistant lining is typically applied at film thicknesses of 20 mils (500 microns) or thicker and can cure at temperatures down to 35°F (2°C). It is resistant to potable water, raw water, industrial process water, wastewater, and sewage. This product is ideal for water storage, municipal wastewater, and water treatment facilities.


  • Multi-Gard 955 CP

    Features:

    • Low odor
    • Very high solids
    • Excellent wetting and flow properties
    • Easy 1:1 mix ratio
    • One coat system for a variety of substrates including CMU
    • VOC compliant to current AIM regulations

    Description:

    A solvent-free epoxy designed and uniquely formulated for use as a coating for aluminum casting quench pit environments. It has been tested by the Aluminum Association and found suitable for this use. In many cases it can be used as a one-coat system direct to steel or concrete. Has excellent wetting and flow properties and can be spray, brush or roller applied. It has a workable pot life (90 minutes at 75°F) and while plural spray equipment may be used, it is not required.


  • Non-Skid Filler #1

    Features:

    • Provides non-skid properties
    • Excellent durability
    • Easy to mix; non-settling filler
    • No constant agitation needed
    • Non-sparking filler

    Description:

    Non-metallic; non-silica based non-skid filler


  • Phenoline 1205

    Features:

    • Excellent resistance to ethanol, gasoline, jet fuels and solvents.
    • Excellent abrasion resistance.
    • Excellent thermal shock resistance (0 to 300° F).
    • VOC compliant to current AIM regulations.
    • Excellent resistance to deionized or demineralized water up to 203°F (95°C).
    • Excellent resistance to crude oil up to 250°F (121°C).
    • Excellent for crude oil storage and transportation up to 250° F (121° C)
    • Recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings to control Corrosion Under Insulation (CUI).

    Description:

    Glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. 1205 exhibits very good acid resistance. Excellent for use as a lining for tanks or pipes in process facilities where hot water or abrasive conditions exist.


  • Phenoline 187 UHS LT Finish

    Features:

    • Excellent solvent/fuel resistance
    • Excellent water resistance
    • High solids, low odor, low VOC
    • Airless spray
    • Conforms to MIL-PRF-23236B(SH) Type IV, Class 2, Grade B
    • Low Temperature application and cure 40°F (4.4°C)

    Description:

    Phenoline 187 UHS LT Finish is an ultra high solids low temperature cure amine modified epoxy specially formulated to line ballast, oil and fuel storage tanks as well as water tanks and pipes, containment areas and water and waste water treatment plants. It is low in both odor and VOC. It provides excellent surface wetting and adhesion properties.


  • Phenoline 187 UHS LT Primer

    Features:

    • Excellent solvent/fuel resistance
    • Excellent water resistance
    • High solids, low odor, low VOC
    • Conforms to MIL-PRF-23236B(SH) Type IV, Class 2, Grade B
    • High flash point >200°F (93°C)
    • Low Temperature application and cure 40°F (4.4°C)

    Description:

    Phenoline 187 UHS LT Primer is an ultra high solids low temperature cure amine modified epoxy specially formulated for application under Phenoline 187 UHS LT Finish. It is low in both odor and VOC. It conforms to MIL-PRF-23236B(SH) Type IV, Class 2, Grade B and is recommended for industrial and marine exposures on steel and concrete. It provides excellent surface wetting and adhesion properties. It is used to line ballast, oil, and fuel storage tanks as well as water tanks and pipes, containment areas and water and waste water treatment plants.


  • Phenoline 187 VOC

    Features:

    • High solids; Low VOC formula
    • VOC compliant to current AIM regulations
    • Excellent overall chemical resistance
    • Excellent for crude-oil storage
    • Excellent resistance up to 400°F(204°C)
    • Excellent abrasion & thermal shock resistance
    • Meets the FDA requirements for 21CFR 175.300 for direct food contact
    • Passes EI 1541 jet fuel gum test
    • Complies with MIL-PRF-4556F testing

    Description:

    High solids epoxy lining with exceptional chemical resistance. Primarily as a tank lining, it is recommended for storage of crude oil (180°F/82°C), demineralized water (150°F/65°C), tap water (200°F/93°C) food and beverage industries, and water and wastewater exposures. Is excellent as a protective coating under insulation, operating at (400°F/204°C). Outstanding resistance to wet/dry cycling conditions at these elevated temperatures.


  • Phenoline 309

    Features:

    • Single coat application reduces labor costs
    • Ultra-high build capabilities provides a void-free film and excellent edge protection
    • Wide chemical resistance to acids, caustics and aliphatic solvents
    • Can be mat reinforced where exposure conditions dictate
    • Application by airless spray equipment (plural component acceptable but not required)
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, airless-applied, ultra-high build coating for use on steel and concrete substrates subject to aggressive chemical fume and spill exposure. Phenoline 309 provides exceptional resistance to thermal shock and abrasion, and has found wide acceptance in a broad variety of heavy industrial applications.


  • Phenoline 310

    Features:

    • Rapid cure-to-handle and cure-to-service characteristics
    • Low temperature (35°F) cure capabilities
    • Single coat application reduces labor costs
    • Ultra-high build capabilities provides a void-free film and excellent edge protection
    • Wide chemical resistance to acids, caustics and aliphatic solvents
    • Exceptional bond strength
    • Can be mat reinforced where exposure conditions dictate
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, plural-component applied, ultra-high build coating for use on steel and concrete substrates where rapid cure characteristics are required. Phenoline 310 is applied by plural component spray equipment and offers the same high performance properties of Phenoline 309, yet in a quick-curing formulation.


  • Phenoline 311 Primer

    Features:

    • Low temperature cure (20°F)
    • Excellent blast-hold protection
    • Suitable for use over damp concrete
    • Excellent application characteristics
    • Fast recoat times
    • Moisture tolerance during application
    • Meets VOC restrictions
    • Low HAP’s content
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

    Description:

    A tank lining holding primer that has a variety of attributes including low-temperature cure, fast recoat times, moisture tolerance during application and cure, and excellent blast-hold protection. Phenoline 311 Primer is often used with thick film lining systems as a holding primer (maintain blast cleaning) and is suitable for both new tanks and relines. It exhibits excellent surface wetting characteristics and quick cure for handling. It contains high levels of inert flake reinforcement. Excellent for use as a bonding primer for linings when damp concrete or masonry substrates are encountered.


  • Phenoline 333

    Features:

    Description:

    Phenoline 333 is a low bake, high solids, modified epoxy formulated for use as a protective lining with excellent resistance to molten sulfur. Excellent chemical and thermal shock resistance.


  • Phenoline 353

    Features:

    • Outstanding overall chemical resistance
    • Dense, highly cross-linked film for superior barrier protection
    • Excellent abrasion resistance and toughness
    • Well-suited for hydrocarbon exposures
    • Low temperature cure version available

    Description:

    Phenoline 353 is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used is both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, and many others.


  • Phenoline 353 LT

    Features:

    • Outstanding overall chemical resistance
    • Dense, highly cross-linked film for superior barrier protection
    • Excellent abrasion resistance and toughness
    • Well-suited for hydrocarbon exposures
    • Cures down to 35°F (2°C)
    • Meets NORSOK System 7C Requirements for subsea equipment up to 356°F (180°C)

    Description:

    Phenoline 353 LT is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used in both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, subsea oil and gas equipment, and many others. This low temperature cure formulation allows application and curing down to 35°F (2°C).


  • Phenoline 375 T

    Features:

    Description:

    Lining for corrosive immersion environments, where commodities may contain acids, alkalis, solvents and salts. Formulated as an interior lining for resistance to kaolin clay slurry, titanium dioxide slurry, and caustic soda at concentrations up to 73%.


  • Phenoline 379

    Features:

    • Single coat application reduces labor costs
    • Ultra-high build capabilities provides a voidfree film and excellent edge protection
    • Resistant to inorganic and organic acids, caustics and most solvents
    • Can be mat reinforced where exposure conditions dictate
    • Application by airless spray equipment (plural component acceptable but not required)
    • VOC compliant to current AIM regulations

    Description:

    Single-coat, airless-applied, ultra-high build coating for use on steel and concrete substrates subject to aggressive chemical exposure. Phenoline 379 has the same application and physical properties of Phenoline 309 but provides enhanced chemical protection for a broader and more concentrated range of acids.


  • Phenoline 385

    Features:

    • High solids; Low VOC formula
    • VOC compliant to current AIM regulations
    • Excellent for crude-oil storage
    • Excellent resistance to petroleum products
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Complies with MIL-PRF-4556F testing
    • Fully compliant with the EI1541 performance requirements for Aviation Fuel Handling Systems (commonly known as the Jet Fuel Gum Test)

    Description:

    High performance, high solids, epoxy lining that is recommended for a variety of petroleum storage products including 180°F (82°C) crude oil, demineralized water 150°F (65°C), crude/water mixtures, fuel oil, jet fuel, biodiesel, and gasoline. It is also a good choice for wastewater and water exposures. Product is self-priming and is normally applied in two coats. It is also suitable for food-grade (aqueous) cargos and meets the FDA requirements for 21CFR 175.300 for direct food contact.


  • Phenoline Tank Shield

    Features:

    • Batch mix formulation, single leg airless spray
    • High impact resistance
    • Superior adhesion to steel
    • Excellent resistance to water and salt water
    • Resistance to a broad range of fuels
    • Passes EI 1541 requirements for internal protective coating systems used in aviation fuel handling systems, including the jet fuel gum test
    • Adheres to API 653 inspection and API 652 guidelines for inspection intervals.
    • Resistant to hot water up to 180°F (82°C)
    • Excellent abrasion resistance and flexibility
    • Can be applied down to 35 °F (2 °C)
    • Can be applied as a single or multi-coat system
    • Non-blushing with a long recoat window
    • Low odor

    Description:

    This product is a solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Plural component spray equipment is not required. The product is blush resistant and is typically applied at film thicknesses of 20 mils (500 microns) or thicker as needed (tank floors). It can handle exposures typically seen in the oil and gas industries; crude oils and fuels. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for municipal wastewater and water treatment facilities.


  • Phenoline Tank Shield Plus

    Features:

    • Excellent petrochemical resistance (fuels and crude)
    • High impact resistance
    • Superior adhesion to steel
    • Excellent hot water resistance
    • Excellent abrasion resistance
    • Can be applied as low as 35°F (2°C)
    • Tolerates low temperature excursions to 20°F (-7°C) during cure
    • Can be applied as a one-coat 20-80 mil system
    • Recommended as a petroleum tank bottom lining per API recommended practice 652.
    • Tank Shield Plus is a thick film reinforced lining proven to provide integrity at greater than 50 mils
    • Non-blushing, single or multi-coat system
    • Recommended as a petroleum tank bottom lining per API recommended practice 653.

    Description:

    This product is a solvent free, low temperature cure, high performance epoxy lining designed to handle common cargoes in the oil and gas industry including crude oil, gasoline, jet fuels, and diesel. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for Municipal wastewater and water treatment facilities. It can handle deionized water up to 180°F (82°C) and is applied at film thicknesses of 20-80 mils (500-1500 microns) in a non-blushing, single coat application. Tank Shield Plus has good elongation and proprietary reinforcement which enables it to bridge perforations which may occur from bottom side corrosion. Tank Shield Plus remains water tight over a hole in 2 atmospheres of head pressure.


  • Plasite 3070

    Features:

    • Superior resistance to acids and solvents
    • Conforms to many of the current VOC regulations
    • Meets the requirements of the U.S. Food and Drug Administration, 21 CFR 175.300 for use in direct food contact areas.

    Description:

    A bake coating using an unmodified phenolic resin with superior resistance to acids and solvents. Conforms to many of the current VOC regulations.


  • Plasite 3070 L

    Features:

    Description:

    A bake coating using a phenolic resin (baked, unmodified) with superior resistance to sulfuric acid and solvents. Conforms to most VOC regulations. Tank lining for solvent, concentrated sulfuric acid, hot water, food products and as a protective coating for machinery parts, filter press plates, fans, etc. PLASITE 3070 L meets the FDA requirements for 21 CFR, 175.300.


  • Plasite 3073

    Features:

    • High solids, Low VOC formula
    • Excellent abrasion resistance
    • Resistant to a wide range of acids, chemicals, and solvents
    • Excellent thermal shock resistance
    • Resistant to concentrated sulfuric acid
    • Excellent for transportation equipment

    Description:

    A high solids phenolic lining offering superior resistance to acids, chemicals, solvents and salts. Conforms to FDA Title 21 CFR 175.300.


  • Plasite 4006

    Features:

    Description:

    As a chemical-resistant coating for tank lining service and as a maintenance coating to protect against cor¬rosive conditions encountered in waste treatment, chemical/food processing and carbon filters. When combined with abrasive conditions, use PLASITE 4006HAR.


  • Plasite 4006 HAR

    Features:

    Description:

    As a chemical-resistant coating for tank lining service and as a maintenance coating to protect against cor¬rosive conditions encountered in waste treatment, chemical/food processing and carbon filters. When combined with abrasive conditions, use PLASITE 4006HAR.


  • Plasite 4007

    Features:

    • Excellent resistance to organic and inorganic acids, salts, gasoline and crude oil

    Description:

    PLASITE 4007 is a high chemical resistant coating. May be used as a light colored topcoat for 4300 or as a multi-coat coating system with or without the option of incorporating fiberglass cloth reinforcement.


  • Plasite 4007 CI

    Features:

    Description:

    PLASITE 4007 (4007CI) is a high chemical resistant coating. May be used as a light colored topcoat for 4300 or as a multi-coat coating system with or without the option of incorporating fiberglass cloth reinforcement.


  • Plasite 4100

    Features:

    • Exceptional resistance to inorganic and organic acids
    • Thick film for tank lining service
    • Excellent abrasion resistance and hardness
    • Handles dry heat to 380 °F (193 °C)
    • Meets FDA requirements for 21 CFR 175.300 and 177.2420
    • Excellent caustic resistance

    Description:

    Plasite 4100 is a high performance lining-grade coating reinforced with inert flake pigments combined with a special curing system to provide outstanding chemical resistance and physical properties. It has exceptional resistance to inorganic and organic acids, oxidizing agents and salts. It can handle dry heat up to 380 °F (193 °C) and will resist condensing acid vapors (sulfuric) typically found in FGD (flue gas desulfurization) systems.


  • Plasite 4110

    Features:

    • Meets the criteria of NSF/ANSI/CAN 600

    Description:

    Vinyl ester resin combined with special curing system and inert flake pigment to provide outstanding chemical and physical properties. Specially formulated for excellent abrasion resistance. PLASITE 4110 meets the FDA requirements for 21 CFR, 175.300 and 177.2420 and is suitable for potable water service per NSF Std. 61. Uses: As a high chemical abrasion-resistant thick film for tank lining service and as a maintenance coating for severe exposure.


  • Plasite 4300

    Features:

    Description:

    Plasite 4300 is a vinyl ester resin combined with special curing system and inert flake pigment to provide outstanding chemical and physical properties. Intended for use as a high chemical-resistant thick film for tank lining service and as a maintenance coating for severe exposure.


  • Plasite 4300 CI

    Features:

    Description:

    Uses: As a high chemical-resistant thick film for tank lining service and as a maintenance coating for severe exposure. PLASITE 4300 CI is formulated to provide shorter set and recoat times with reduced final curing time requirements.


  • Plasite 4301 HT

    Features:

    • Outstanding resistance to aggressive chemicals
    • Suitable for use as a highly chemically resistant lining
    • Excellent for splash, spill and film exposures on structural steel
    • Glass-flake reinforced film
    • High tensile and flexural strength
    • High film thickness

    Description:

    This high performance glass-flake filled coating was designed for application over steel or concrete in extreme chemical exposures. It is resistant to a wide variety of aggressive chemicals, including organic and inorganic acids, most alkalies, and many solvents. It is ideally suited for immersion service as internal steel tank linings, as well as for aggressive chemical splash, spill, and fume exposures on structural steel. Typical uses include steel tank and vat linings, secondary containment, structural steel, process floors, grating, sumps and trenches, scrubbers, and clarifiers.


  • Plasite 4310

    Features:

    • Outstanding acid immersion performance
    • Solvent immersion lining
    • High temperature resistance
    • Performs under thermal shock
    • Extremely high abrasion resistance
    • self priming
    • High build

    Description:

    Plasite 4310 is a vinyl ester resin combined with special curing system and inert flake pigment to provide outstanding chemical and physical properties. Plastic 4310 is specially formulated for excellent abrasion resistance while retaining temperature, chemical and other physical properties of Plasite 4300.


  • Plasite 4500

    Features:

    • High impact resistance
    • Superior adhesion to steel
    • Resistance to a broad range of chemicals
    • Can be applied as low as 35°F/2°C
    • Can be applied as a one-coat 20-60 mil system
    • NSF/ANSI 61 compliant for use in potable water tanks, pipes, and valves.*
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
    • Meets AWWA C210 requirements for use in water supply pipeline and valves
    • Passes ASTM G210 - Severe Waste Water Analysis Tests (SWAT)

    Description:

    PLASITE 4500 is a solvent free, flake-reinforced, high performance epoxy coating designed as an internal tank lining for chemical or other commodity storage. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, many acids and some solvents. Excellent versatility allows for potable water and water treatment immersion service.


  • Plasite 4500 FS

    Features:

    • Quick walk on time
    • Fast return to service
    • Excellent edge retention
    • Superior adhesion to steel
    • Resistance to a broad range of chemicals
    • Will cure down to 20°F/-7°C
    • Can be applied as a single-coat 20-60 mil system
    • Passes EI 1541 jet fuel gum test.

    Description:

    PLASITE 4500 FS is a solvent-free, edge retentive and high performance epoxy coating designed as an internal tank lining for chemical or other commodity storage. It is a two-component system applied by plural component spray equipment, at film thicknesses of 20-60 mils (500-1500 microns) in a monolithic application. It is particularly suited for petroleum-based cargoes including crude oil; fuel oils and gasoline storage. It has extremely fast cure times for turnaround projects that require placing back in service quickly and will cure down to 20F(-7C). The product has a unique ability to be applied as a prime coat and immediately back-rolled after spraying. This is recommended to treat pitted steel, weld areas, and the like. A second coat can be applied right after the prime coat using the same product for a “two-coat” yet monolithic application.


  • Plasite 4500 S

    Features:

    • High impact resistance
    • Superior adhesion to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied in a one-coat application up to 60 mils
    • Can be sprayed using single component airless equipment
    • VOC compliant
    • Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
    • Certified by UL to meet the drinking water criteria of NSF 61
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600

    Description:

    Plasite 4500 S is a 100% solids, flake-filled, premium epoxy coating designed for internal steel and concrete tanks and pipe lining. Suitable for sheet piling, H and pipe pilings in marine immersion and splash zones.


  • Plasite 4540

    Features:

    • Quick walk on time
    • Fast return to service
    • Excellent edge retention
    • Superior adhesion to steel
    • Blush resistant
    • Resistance to a broad range of chemicals
    • Excellent hot water resistance
    • Can be applied to substrate as low as 35°F/2°C
    • Can be applied as a single-coat 20-50 mil system

    Description:

    This product is a solvent-free, edge retentive, blush-resistant high performance epoxy coating designed as an internal tank lining for chemical or other commodity storage. It is a two-component system applied by plural component spray equipment, at film thicknesses of 20-50 mils (500-1250 microns) in a monolithic application. It is particularly suited for petroleum-based cargoes including crude oil; fuel oils, gasoline and gasoline blends, jet fuel and diesel. It has excellent hot water resistance (deionized water up to 180°F/82°C). It has extremely fast cure times for turnaround projects that require placing back in service quickly. The product has a unique ability to be applied as a prime coat and immediately back-rolled after spraying. This is recommended to treat pitted steel, weld areas, and the like. A second coat can be applied right after the prime coat using the same product for a “two-coat” yet monolithic application.


  • Plasite 4550

    Features:

    • High Impact Resistance
    • Superior adhesion to metal substrates and concrete
    • Outstanding adhesion to stainless steel, even with low blast profiles
    • Well suited to protect alloy steels typically used to wet FGD systems where pitting and crevice corrosion often occur
    • Fast cure-to-service; depending upon application can be placed into service within 36 hours
    • Minimal blushing characteristics
    • Can be applied in temperatures as low as 35 °F (1.7 °C)
    • Can be applied as a one-coat system
    • Tested and approved for crude oil transportation up to 350 °F (177 °C)
    • Superior thermal shock resistance from -40 to 350 °F (-40-177 °C)
    • Complies with the API RP 652 definition of a reinforced liner.

    Description:

    PLASITE 4550 is a 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid.


  • Plasite 4550 HT

    Features:

    • Broad spectrum chemical resistance
    • Superior adhesion to metal substrates and concrete
    • High Impact Resistance
    • Fast cure-to-service; depending upon application can be placed into service overnight
    • Excellent performance in high temperature cathodic protection
    • Blush resistant formulation
    • Cures below freezing temperature
    • Can be applied as a one-coat system
    • Complies with the API RP 652 definition of a reinforced liner.

    Description:

    PLASITE 4550 HT is a high solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, and sour crude oil.


  • Plasite 4550 S

    Features:

    • High impact and thermal shock resistance
    • Superior adhesion to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied up to 60 mils in one coat
    • Can be sprayed using single component airless equipment
    • Passes ASTM G210 - Severe Waste Water Analysis Test (SWAT)

    Description:

    PLASITE 4550 S is a 100% solids, flake filled, premium novolac epoxy coating designed for internal steel and concrete substrates. It is a two component system consisting of four-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, from a total thickness of 20-60 mils (500-1500 microns) in a single coat application for a variety of applications. This product has been tested and is approved for crude oil storage and transportation up to 350°F (177°C). It has superior thermal shock resistance over the range -40° to 350°F (-40 to 177°C). Typical Uses: Crude oil tankers, chemical storage tanks, wastewater clarifiers, plating vats, oil storage tanks, catwalks, pulp and paper liquor tanks or concrete exposures in wastewater applications.


  • Plasite 4555 S

    Features:

    • High impact resistance
    • Superior bond strength to steel and concrete
    • Resistance to a broad range of chemicals
    • Can be applied in a one-coat application up to 30 mils/.75 mm
    • Easily repaired using inter-coat prep procedures

    Description:

    Plasite 4555 S is a 100% solids, flake-filled, premium novolac epoxy coating designed for internal steel and concrete tanks and pipe lining. It is a two component system consisting of 4-parts by volume of Part A resin and one part by volume of Part B hardener. It is applied by plural component or single component spray equipment, in a one-coat application (25-30 mils) for internal lining applications.


  • Plasite 5302

    Features:

    • Cures quickly
    • Form an exceptionally tough, impact and abrasion resistant surfaces
    • Excellent adhesion to concrete, steel and wood
    • Non-shrinking
    • Minimum down time
    • Excellent resistance to water, oil, brine, most acids and alkalies

    Description:

    Plasite 5302 is an epoxy monolithic liner formulated for chemical and abrasion resistance in continuous immersion service.


  • Plasite 5302AR

    Features:

    • Cures quickly to form an exceptionally tough, abrasion resistant surface.
    • Excellent adhesion to concrete and steel.
    • Minimum down time.
    • Non-shrinking.

    Description:

    PLASITE 5302AR is an epoxy monolithic liner formulated for excellent abrasion resistance while retaining chemical, temperature and other physical properties of PLASITE 5302. Uses: Not intended where aesthetics are a concern. Heavy duty lining designed for areas requiring the ultimate in abrasion resistance up to 150°F. Slurry Line Elbows Cobbler Repulp Water Circulators Feed Chutes Pan Feeders Classifier Flights and Shoes Pump Casings Conveyor Skirts Hoppers Chute Lining Pipe Elbows


  • Plasite 5371

    Features:

    • Trowel or spray applied
    • Non-sagging liner
    • Can be applied to steel or concrete (damp or dry)
    • Protective liner in one coat application on vertical, horizontal or overhead surfaces
    • Passes ASTM G210 - Severe Waste Water Analysis Tests (SWAT)

    Description:

    Formulated for optimum chemical resistance to the chemical exposures found in the immersion and highly corrosive environments of municipal wastewater treatment.


  • Plasite 5372

    Features:

    • A chemically resistant monolithic liner applied in one 20 mil spray coat to vertical, horizontal, and overhead surfaces.

    Description:

    Uses: Formulated for spray application to newly fabricated concrete pipe or for steel surfaces to provide optimum chemical resistance for structures found in the immersion and highly corrosive environments of municipal wastewater treatment.


  • Plasite 7122

    Features:

    • Versatile coating with wide chemical resistance
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Excellent resistance to fuels
    • Long history of performance
    • Self-priming

    Description:

    This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance.


  • Plasite 7122 TFE

    Features:

    • Versatile coating with wide chemical resistance
    • Excellent abrasion resistance
    • Excellent thermal shock resistance
    • Excellent resistance to fuels
    • Long history of performance
    • Self-priming

    Description:

    This lining-grade epoxy has wide chemical resistance and is suitable for use as a chemically resistant coating for aggressive atmospheric exposures or as a lining for a variety of chemical exposures. It is suitable for use in food-grade service where product purity (taste and odor) are critical. It has excellent abrasion and thermal shock resistance. It has superior release properties to reduce or avoid issues with product cargoes such as sticking, hang-ups or bridging.


  • Plasite 7122 VAR

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Superior abrasion resistance and good flexibility
    • Complies with FDA 21CFR 175.300 criteria for food contact

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VAR, is an abrasion resistant tank lining and industrial maintenance coating.


  • Plasite 7122 VOC

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Very good abrasion resistance and flexibility
    • Complies with FDA 21CFR 175.300 criteria for food contact

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VOC is used as a tank lining and for industrial maintenance.


  • Plasite 7122 VTF

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents.
    • Smooth non-stick surface.
    • Very good abrasion resistance and flexibility.
    • Complies with FDA 21CFR 175.300 criteria for food contact.

    Description:

    A cross linked epoxy-phenolic cured with a polyamine curing agent. Formulated with particular attention to wide chemical resistance and ease of handling. Plasite 7122 VTF, is a PTFE filled tank lining for use where the surface requires release properties to reduce product sticking and bridging.


  • Plasite 7133 HS

    Features:

    • Plasite 7133 HS will not impart taste or odor to such products as sugar solutions, wine, beer, meat products and similar items.
    • This coating is resistant to the standard cleaning for sanitation purposes and will withstand normal atmospheric steam cleaning procedures.
    • Plasite 7133 HS meets the FDA requirements for 21 CFR 175.300 for direct aqueous food contact.

    Description:

    A combination of epoxy and polyamide resins with selected pigments designed specifically as a high chemical resistant, non-toxic, odorless coating.


  • Plasite 7159

    Features:

    • Easy-to-apply high performance thin film lining
    • Protects I high temperature demineralized water immersion - 212°F (100°C)
    • Recommended in high pressure three phase service up to 250°F (121°C)
    • Can be air dried or force cured for prompt service

    Description:

    A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry.


  • Plasite 7159 HAR

    Features:

    • Easy-to-apply high performance thin film lining
    • Protects I high temperature demineralized water immersion - 212°F (100°C)
    • Recommended in high pressure three phase service up to 250°F (121°C)
    • Can be air dried or force cured for prompt service
    • Outstanding abrasion resistance

    Description:

    A water-resistant, phenolic epoxy coating polymerized with a polyamine type curing agent. A high performance lining for elevated temperature and pressure immersion services in high purity water, as well as the oil/water separating processes encountered in the petroleum industry. This HAR version of Plasite 7159 is extremely abrasion resistant.


  • Plasite 7240

    Features:

    • Excellent resistance to a wide range of chemicals and water solutions

    Description:

    An epoxy primer cured with a polyamine curing agent and formulated with special pigmentation to produce a cured film having electrical conductivity. A conductive primer for application to nonconductive substrates prior to topcoating with one of the Plasite conductive coatings or conductive floor surfacers.


  • Plasite 729

    Features:

    • Formulated with fluorocarbon pigmentation to provide excellent release and mass flow properties while maintaining temperature and chemical resistance
    • Meets FDA requirements for 21 CFR, 175.300

    Description:

    PLASITE 729 is a two-component high build coating based on epoxy resins and a polyamide curing agent. Formulated to provide the end user with a coating that has excellent adhesion and superior flexibility while conforming to current VOC regulations. Plasite 729 is designed as an internal lining for hoppers, silos or covered hopper cars storing or transporting bulk chemicals and dry food products.


  • Plasite 9029

    Features:

    • Strong Film 100% Solids Excellent Working Properties Easily Topcoated

    Description:

    A 100% solids epoxy blended with a properly graded combination of silica fillers and inerts to provide excellent bulking, film strength and working properties. 9029 Filler meets the FDA requirements for 21 CFR, 175.300. Plasite 9029 is used as a filler for concrete voids, as well as a repair or grout material. Topcoating with the appropriate Carboline coating enables the system to meet the requirements as a tank lining for the food and beverage industries.


  • Plasite 9053

    Features:

    • Low VOC
    • Water-resistant
    • Protection in high temperature brine solutions
    • Complies with the United States Food and Drug Administration 21 CFR 175.300 for direct food contact use.

    Description:

    A low VOC water-resistant epoxy coating polymerized with a polyamine-type curing agent. Primarily as a tank lining for water, including deionized or distilled water at elevated temperatures. Special pigmentation provides additional film undercutting protection in high temperature brine solutions. Complies with the requirements of the United States Food and Drug Administration 21 CFR 175.300 for direct food contact use.


  • Plasite 9060

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents
    • Very good abrasion resistance and flexibility
    • Complies with FDA 21 CFR 175.300 criteria for food contact

    Description:

    A high solids modified epoxy cured with an amine adduct curing agent. Designed specifically as a highly chemical-resistant, non-toxic, tank lining.


  • Plasite 9060 HAR

    Features:

    • Excellent overall chemical resistance to a wide range of acids, alkalies and solvents
    • Superior abrasion resistance and flexibility
    • Complies with FDA 21 CFR 175.300 criteria for food contact

    Description:

    Designed specifically as a tank lining coating where high abrasion and chemical resistance is required.


  • Plasite 9081

    Features:

    Description:

    A high solids modified epoxy cured with a polyamine curing agent. Formulated with particular attention to chemical resistance and ease of handling. Primarily used as an industrial tank lining.


  • Plasite 9081 SC

    Features:

    Description:

    A high solids, modified epoxy cured with an amine curing agent. Formulated with particular attention to providing abrasion and chemical resistance, ease of handling and conformance to government regulations limiting volatile content. Silicon carbide filler greatly enhances abrasion resistance. Plasite 9081 SC is primarily used as a tank lining and for industrial maintenance. May be applied to metal or concrete. FOR INDUSTRIAL USE ONLY.


  • Plasite 9085

    Features:

    Description:

    A high solids modified epoxy novolac cured with a polyamine curing agent. Designed specifically as a highly chemical-resistant coating for concentrated sulfuric acid immersion service.


  • Plasite 9133

    Features:

    • Meets FDA requirements for 21CFR 175.300 for Aqueous food contact
    • VOC compliant to current AIM regulations
    • Excellent for crude-oil storage
    • Excellent resistance to petroleum products
    • Excellent abrasion resistance
    • Excellent thermal shock resistance

    Description:

    High solids epoxy cured with a polyamine-type curing agent formulated for a wide range of chemical resistance and ease of handling.


  • Plasite 9145

    Features:

    • Excellent resistance to a wide range of latex resin solutions

    Description:

    A high solids epoxy cured with an amine curing agent. Formulated with particular attention to latex resin resistance with the Plasite 9145 TFE version available to provide superior release properties.


  • Plasite 9145 TFE

    Features:

    • Excellent resistance to a wide range of latex resin solutions

    Description:

    A high solids epoxy cured with an amine curing agent. Formulated with particular attention to latex resin resistance with special modification to provide superior release properties. Plasite 9145 TFE is used as a second coat over Plasite 9145 when additional release properties are desired or required.


  • Plasite 9200 HAR

    Features:

    • Excellent resistance to a wide range of chemicals and water solutions.

    Description:

    Plasite 9200 HAR is a high solids, self-priming epoxy, cured with an amine curing agent and formulated with special pigmentation to produce an abrasion resistant film with a degree of electrical conductivity.


  • Plasite 941

    Features:

    • Heavy bodied
    • Quick set
    • Specially formulated for vertical surfaces
    • Becomes a hard surface when fully cured

    Description:

    Plasite 925 MG is a caulking compound which is a two part system with a short pot life. Therefore, only that amount which can be applied during the specified pot life should be mixed at any time. Plasite 925 MG is used to fill, seal, patch and bond and is normally used in conjunction with Plasite coatings. Generally, Plasite 925 MG may be used in most dry environments and the vapor stages of vessels. The ingredients in Plasite 925 MG caulking compound meet the requirements of the U.S. Federal Register, U.S. Food and Drug Administration, Title 21, Chapter 1, Par. 175.300. FOR INDUSTRIAL USE ONLY.


  • Plasite 943

    Features:

    Description:

    INTENDED USE: Plasite 943 is recommended as a chemical resistant spot repair material for Plasite vinyl ester lining systems. FOR INDUSTRIAL USE ONLY!


  • Plasite 9500

    Features:

    • An easy-to-apply chemical resistant internal tank lining
    • Chemical resistance to a wide range of solvents, alkalies, hot water, acids, brines, crude oil, fatty acids and food products
    • Meets the FDA requirements for 21 CFR, 175.300

    Description:

    A high temperature bake, high solids, modified epoxy cured with an amine curing agent.


  • Plasite 9500 HAR

    Features:

    Description:

    INTENDED USE: An easy-to-apply chemical resistant internal tank lining. Meets the FDA requirements for 21 CFR, 175.300. PLASITE 9500 has been accepted by the U.S. Environmental Protection Agency for surfaces which contact potable water. FOR INDUSTRIAL USE ONLY!


  • Plasite 9570

    Features:

    • Meets the requirements of US Food & Drug Regulations 21 CFR 175.300
    • Excellent chemical resistance to all caustic solutions up to 200 °F (93 °C) and to a wide range of acids, solvents and water solutions

    Description:

    Plasite 9570 is a highly resistant film for chemical tank lining service. Specifically formulated for excellent abrasion resistance while retaining temperature, chemical and other physical properties to provide greater release properties to aid in the prevention of product hang-up or bridging problems.


  • Plasite 9570 HAR

    Features:

    Description:

    INTENDED USE: As a highly resistant film for chemical tank lining service.


  • Plasite 9571

    Features:

    • Excellent resistance to caustic solution

    Description:

    A low temperature bake, high solids, epoxy phenolic cured with an amine curing agent.


  • Plasite 9573

    Features:

    Description:

    This lining is a highly resistant film for chemical tank lining service. It has excellent resistance to many caustic solutions up to 200°F (93°C), combined with chemical resistance to a wide range of acids, solvents and water solutions. Consult Carboline for specific cargo.


  • Plasite Thinner #15

    Features:

    Description:


  • Plasite Thinner #20

    Features:

    Description:


  • Plasite Thinner #201

    Features:

    Description:


  • Plasite Thinner #30

    Features:

    Description:


  • Plasite Thinner #4

    Features:

    Description:


  • Plasite Thinner #46

    Features:

    Description:


  • Plasite Thinner #86

    Features:

    Description:

    -


  • Plasite Thinner #93

    Features:

    Description:


  • Plasite Thinner #98

    Features:

    Description:


  • Polyclad 767

    Features:

    • Fast curing rate increases throughput
    • Superior wetting properties result in better edge retention and excellent adhesion to steel
    • Mix ratio of 1:1 and user friendly application properties
    • Unlimited build with single multi-pass coats
    • Self priming (120 mil maximum for potable water)
    • Meets AWWA C222
    • UL approved for ANSI/NSF Std. 61 potable water

    Description:

    Polyclad 767 is a top-tier pipe coating engineered for superior performance in safeguarding both pipeline interiors and exterior pipes. Specifically formulated to excel in various applications, this cutting-edge coating is designed to provide exceptional protection for water transmission pipelines, wastewater treatment facilities (both municipal and industrial), and interior tank linings. Elevating its versatility, Polyclad 767 extends its protective prowess to include exterior pipe services, ensuring comprehensive coverage for both the interior and exterior surfaces.


  • Polyclad 777 Fast-Set

    Features:

    • Fast curing rate increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio 1:1 and user friendly application properties
    • Can be topcoated with Carbothane series of products
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222
    • Compliant with EN 10290

    Description:

    Polyclad 777 Fast Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Polyclad 777 PL

    Features:

    • Fast curing increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio of 1:1 with easy application properties
    • Can be topcoated with Carbothane series of products
    • Unlimited film build with single or multi-pass coats

    Description:

    Polyclad 777 PL is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Typical uses include pipeline exterior surfaces. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a fast-set cure mechanism. No primer is required.


  • Polyclad 777 Slow-Set

    Features:

    • Fast curing increases throughput
    • Excellent abrasion resistance
    • Superior wetting properties for outstanding adhesion
    • Mix ratio 1:1 and user friendly application properties
    • Can be topcoated by Carbothane series of products
    • Unlimited build with single multi-pass coats
    • Compliant with AWWA C222
    • Compliant with EN 10290

    Description:

    Polyclad 777 Slow Set is a high performance 100% solids structural polyurethane designed to provide superior corrosion protection for steel, ductile iron and concrete pipe. Tenacious adhesion and high impact resistance allow its use in the harshest environments. It forms a dense, long-term impermeable barrier that is ready for service moments after application through a snap-set cure mechanism. Typical uses include steel pipeline exteriors, steel valves & fittings, steel pilings, steel poles (above & below ground), buried tank exteriors, penstocks. No primer is required. Available in snap, fast, medium and slow set times.


  • Polyclad 777R

    Features:

    • Low temperature cure
    • Quick cure to handle
    • Superior wetting properties and outstanding adhesion to steel
    • Excellent edge retention
    • Mix ratio of 1:1 and user friendly application properties
    • Up to 80 mils build with a single application
    • Can be topcoated with Carbothane series of products for long-term color and gloss retention

    Description:

    Polyclad 777 R is a high performance, 100% solids structural polyurethane designed to repair Polyclad 777 or 777 PL when it has been damaged. It can be used on steel pipe exteriors, coating girth welds on steel pipe and other repairs as recommended.


  • Polyclad 956

    Features:

    • Improves flow efficiency in gas pipes
    • Meets API RP5L2 requirements for gas transmission pipeline flow liner
    • Excellent flow and leveling
    • Single-coat application
    • Hard, smooth, glossy finish
    • Excellent abrasion resistance
    • Corrosion prevention during storage

    Description:

    A solvent-less, high gloss, smooth epoxy coating for the lining of gas transmission pipelines. It’s hard, smooth surface aids in the flow of gas by reducing turbulence while protecting the interior surfaces from corrosion. It has excellent flow and wetting characteristics ideal for this type of application and use. Tested in accordance with API RP 5L2 for gas transmission pipelines.


  • Polyclad 975

    Features:

    • Quick dry to touch and QC times
    • Color indicator confirms proper mixing
    • Low temperature cure 40°F (4.4°C)
    • Excellent cathodic protection performance
    • Film build up to 50 mils DFT in one coat
    • Excellent edge retention
    • Superior adhesion to steel
    • Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
    • Can be applied by spray, brush, roller or dual cartridge

    Description:

    Polyclad 975 is an advanced 100% solids, hybrid epoxy pipeline coating. Polyclad 975 has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. It can be used for new pipe or rehabilitation of coated pipe. Polyclad 975 cures fast to allow quick QC and backfill times.Polyclad 975 is designed for spray application. Use Polyclad 975 H for hand applied applications.


  • Polyclad 975 H

    Features:

    • Quick dry to touch and QC times
    • Good brush and roll properties
    • Color indicator confirms proper mixing
    • Low temperature cure 40°F (4.4°C)
    • Excellent cathodic protection performance
    • Film build up to 30 mils DFT in one coat
    • Excellent edge retention
    • Superior adhesion to steel
    • Excellent adhesion over prepared FBE, epoxy and polyurethane coated pipe
    • Can be hand applied by brush or roller

    Description:

    Polyclad 975 H is an advanced 100% solids, hybrid epoxy pipeline coating. It has performance properties designed for corrosion protection of steel and ductile iron pipe exteriors, girth welds or tie-ins. Polyclad 975 H cures fast to allow quick QC and backfill times. H in 975 H stands for hand applied version. Polyclad 975 is the spray version.


  • Polyclad Line Stabilizer

    Features:

    Description:

    Liquid plasticizer to prevent isocyanate catalyzation in spray lines.


  • Pyroclad X1

    Features:

    • Full jet fire certification in accordance with ISO 22899
    • Excellent hydrocarbon pool fire protection (ISO 834/BS-476)
    • LR, DNV & ABS certification
    • Successfully passed Norsok M-501 System 5A environmental test program without a topcoat
    • Superior weathering resistance
    • Very low moisture absorption
    • Explosion resistance
    • Extremely durable, impact resistant finish
    • High film build properties
    • Low flame spread and smoke development

    Description:

    Pyroclad X1 is designed to provide jet fire and hydrocarbon fire protection for structural elements, beams, columns, bulkheads, underdecks and risers. Pyroclad X1 is suitable for applications in the industrial, petrochemical, oil and gas, offshore and refining industries.


  • Pyrocrete 239

    Features:

    • Combined acoustical and fire protection
    • Easily applied by spray or trowel
    • Excellent physical properties – hard, durable
    • Nonflammable – during or after application
    • Asbestos-free – complies with EPA and OSHA regulations
    • Chloride and sulfide free – no special priming required
    • Non-friable – high impact strength
    • Single package – mixed with clean, potable water at the job site
    • Investigated for exterior use by Underwriters Laboratories, Inc
    • Quality Manufactured – under strict Carboline quality standards
    • UL factory inspection service

    Description:

    A medium density, Portland cement based, cementitious fireproofing that is mixed with clean, potable water onsite before application and spray applied to the substrate. It provides 1-4 hour fire protection for structural steel members and upgrades the fire resistance of existing concrete. It can also be used as a thermal barrier over polyurethane foam. Recommended areas of application include pharmaceutical facilities, pulp and paper mills, nuclear and conventional power plants, factories, warehouses, stadiums, institutional and biomedical facilities and acoustical applications.


  • Pyrocrete 240 High Yield

    Features:

    • Cost effective, high yield
    • Over 35 years of proven performance
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Non-friable – high impact strength

    Description:

    PRODUCT IS DISCONTINUED. REPLACEMENT IS 241 HY DEPENDING UPON APPLICATION. CONTACT TECH SERVICE FOR MORE INFO.A 47 lb./ft³ (752 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 241

    Features:

    • Over 40 years of proven performance
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • Jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • UL 2431 Category I-A Outdoor Heavy Industrial and Exterior Environmental Purpose
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 55 lb./ft³ (881 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 241 HD

    Features:

    • Heavy duty, ultra high density formulation
    • Highest durability and toughness on the market
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 70 lb./ft³ (1,121 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 241 HY

    Features:

    • Cost effective, high yield
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Ideal for onsite and offsite application
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A 50 lb./ft³ (800 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrocrete 40

    Features:

    • Cost effective fireproofing solution
    • Outstanding coverage, high build
    • Exceptional durability and toughness
    • UL 1709 hydrocarbon fire rated up to 4 hours
    • BS 476 hydrocarbon fire rated up to 4 hours
    • ISO 22899-1 jet fire rated up to 2 hours
    • ASTM E119 cellulosic fire rated up to 4 hours
    • Cryogenic protection against LNG spills and immersion exposures
    • Resistant to 3 bar blast overpressure
    • Hose stream resistant
    • Tolerant to wide range of climates
    • Lightweight – one-fifth the weight of concrete for equal fire protection
    • Easy application by spray or trowel
    • Nonflammable – during or after application
    • Chloride and sulfide free – no special priming required
    • Asbestos-free – complies with EPA and OSHA regulations
    • Non-friable – high impact strength

    Description:

    A minimum 40 lb./ft³ (640 kg/m³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.


  • Pyrolite 15

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.
    • Economical – Maintains project on budget.
    • Design flexibility with over 40 UL designs.

    Description:

    A 15 lbs./ft³ density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.


  • Pyrolite 22

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.
    • Economical – Maintains project on budget.
    • Design flexibility with over 40 UL designs.

    Description:

    A 22 lbs./ft³ density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.


  • Pyroprime 775 WB

    Features:

    • Excellent flexibility
    • Very good abrasion resistance
    • 300 % (nominal) elongation

    Description:

    A flexible, water-based elastomer that promotes the adhesion of Pyrocrete® 239 to polyurethane foam insulation. Recommended for use over plastic foam insulation to eliminate the requirement for supplementary expanded metal lath reinforcement and mechanical attachment.


  • Reactamine 760

    Features:

    • UL approved for ANSI/NSF Std. 61 potable water*
    • Certified by UL to meet the drinking water criteria of NSF/ANSI/CAN 600
    • Complies with 21 CFR 175.300 Method D, E, & G and Direct Dry Food Contact
    • Complies with Greenbook
    • Passes ASTM G210 - Severe Wastewater Analysis Tests (SWAT)
    • Cold temperature cure
    • Fast cure and walk on time
    • Excellent barrier properties, low permeability
    • Single-coat application 60 to 125 mils
    • Bridges normal shrinkage cracks in concrete
    • True monolithic film on steel and concrete
    • Encapsulates rivets, bolts, and edges in one coat
    • Outstanding abrasion, impact and tear resistance
    • Combines polyurethane and polyurea technologies to form a hybrid polyurethane

    Description:

    Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service.


  • Reactamine 760 HB

    Features:

    • High film build (200 mil plus) in one coat
    • Complies to Greenbook
    • UL approved for potable water*
    • Cold temperature cure
    • Fast cure and walk on time
    • Excellent barrier properties, low permeability
    • Can be used to resurface highly deteriorated concrete
    • Bridges normal shrinkage cracks in concrete
    • True monolithic film on steel and concrete
    • Encapsulates rivets, bolts, and edges in one coat
    • Outstanding abrasion, impact and tear resistance
    • Combines polyurethane and polyurea technologies to form a hybrid polyurethane

    Description:

    Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service. Ultra high build product designed to be applied at high thickness in one coat application.


  • Reactamine ET

    Features:

    • Tough abrasion and impact resistant film
    • High tensile strength and tear resistance
    • Excellent water and waste water resistance
    • Moisture tolerance; during and after cure
    • Low odor; zero VOC
    • Can be applied from 20 °F to 150 °F (-6 °C to 65 °C)
    • Extremely fast cure times (dries to the touch in 10 seconds)
    • Service temperature (dry) of -40 °F to 250 °F (-4 °C to 121 °C)
    • Single coat application (=250 mils)
    • Applies using a heated, plural component spray system
    • Complies with FDA 21CFR 175.300 criteria for dry food contact

    Description:

    Reactamine ET is an extra tough, abrasion resistant elastomer coating with extremely fast cure times that is ideal for concrete substrates. It possesses exceptional toughness for numerous industrial applications that include linings for wastewater applications, secondary containment, sewer lines, manhole restoration, rail cars, wastewater lagoon linings, and other applications needing a tough resilient coating. It is extremely resistant to high abrasion and impact with elongation properties to tolerate movement over concrete substrates.


  • Reactamine Joint Seal

    Features:

    • 100% solids; zero VOC
    • Fast cure times
    • USDA compliant for non-direct food contact
    • Has a functional temperature range of 0° to 250°F (-18°C to 121°C)
    • Excellent water resistance, chemical resistance, and thermal stability at high & low temperatures
    • Works well with asphalt or concrete

    Description:

    Reactamine Joint Seal is a 2-component 100% solids, polyurea-based joint sealant that is self-leveling and cures in approximately 60 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and breakdown. This product can be applied at temperatures ranging from 0° to 150°F (-18° to 65°C) and possess excellent chemical resistance, water resistance and thermal stability at both high and low temperatures.


  • Reactamine Joint Seal FC

    Features:

    • 100% solids; zero VOC
    • Fast cure times
    • USDA compliant for non-direct food contact
    • Has a functional temperature range of 0° to 250°F (-18°C to 121°C)
    • Excellent water resistance, chemical resistance, and thermal stability at high & low temperatures
    • Works well with asphalt or concrete

    Description:

    Reactamine Joint Seal FC is a 2-component 100% solids, polyurea-based joint sealant that is self-leveling and cures in approximately 30 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and breakdown. This product can be applied at temperatures ranging from 0° to 150°F (-18° to 65°C) and possess excellent chemical resistance, water resistance and thermal stability at both high and low temperatures.


  • Reactamine Primer 28

    Features:

    • Excellent bonding primer for polyurea topcoats over steel substrates
    • Excellent for sealing porous substrates like dry concrete

    Description:

    Reactamine Primer 28 is a single component resin formulation that is used as a bonding primer over a number of substrates including steel and concrete. It is particularly effective to promote adhesion of polyurea/polyurethane elastomers to steel substrates. It can also be used to prime and seal dry porous substrates such as concrete


  • Rustbond

    Features:

    • Universal primer and tie-coat
    • Excellent adhesion to SSPC-SP 2 prepared steel, galvanizing, aluminum, stainless steel and copper
    • Low stress, highly flexible film
    • Extremely high solids
    • Low odor
    • Contains corrosion inhibitors
    • Compatible with a variety of topcoats
    • User friendly brush and roller application
    • VOC compliant to current AIM regulations

    Description:

    Rustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and accept a variety of topcoats. Recommended use as primer/sealers for marginally prepared steel and over old coatings. Its excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats. Its thixotropic character reduces run off, ensuring that the edges of existing coatings are encapsulated thus reducing undercutting and peeling. It may also be used as a tie-coat for coatings that exceed their “recoat window.” Consult Carboline Technical Services Department for specific recommendations.


  • Rustbond PS

    Features:

    • Excellent wicking characteristics resulting in very good adhesion to a variety of substrates
    • Low stress during application and cure, can be applied over aged coatings and tight rust
    • Universal primer and tie-coat
    • Very low VOC, less than 100 g/l, and low odor for compliance in many stringent locations
    • Low temperature cure with Additive 8505 to extend the painting season
    • Good pot life in hotter weather without Additive 8505, one Rustbond PS for year-round application
    • User-friendly application with brush, roller, and spray
    • Tolerates higher dry film thickness (DFT) range, easier to apply
    • Excellent sealer for metalizing and thermal sprayed aluminum (TSA)

    Description:

    Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimizing surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher temperatures to help minimize waste and also cures at low temperatures down to 35°F (1.7°C) with Additive 8505 so you have one Rustbond product for year-round application.


  • Sanitile 100

    Features:

    • Heavy duty acrylic block filler
    • High solids with excellent filling properties
    • Dry heat resistance to 200 °F
    • Wet heat resistance to 120 °F
    • Block filler for acrylics, epoxies, and polyesters
    • Single component
    • Low odor; SCAQMD compliant (<100 g/l VOC)
    • Suitable for use in USDA inspected facilities
    • Applicable for LEED projects as a block filler (not considered a thin-film paint)

    Description:

    Specialized high solids filler used for sealing/filling masonry surfaces subject to both aggressive and mild environments. Unique formulation allows for topcoating with conventional or high-performance finishes. May be used as a block filler where LEED-compliant flat or non-flat primers or finishes are required.


  • Sanitile 120

    Features:

    • Excellent primer/sealer for drywall
    • Glue-like bond to almost any surface
    • Outstanding tie-coat over existing coatings
    • Single component, thin-film application
    • Topcoat with virtually any generic coating
    • Ready-to-apply as supplied
    • Fast drying
    • Low odor; low VOC
    • Suitable for use in USDA inspected facilities

    Description:

    Universal bonding primer that adheres tenaciously to virtually any surface including galvanized and stainless steel, aluminum, PVC, FRP and ceramic tile. It can also be used on porous and high PH substrates (up to 12.5) like concrete and cementitious patching compounds.


  • Sanitile 155

    Features:

    • Single component
    • Excellent brush, roll or spray
    • Low odor, low VOC
    • Excellent color and gloss retention
    • Rapid tint color service
    • Suitable for use in USDA inspected facilities

    Description:

    Waterborne acrylic finish used for the protection of drywall and masonry surfaces in light to medium duty service. Excellent application characteristics, low odor, and low VOC. Satin finish provides a pleasing and easily cleanable finish. May also be used for exterior exposed areas due to its weatherability.


  • Sanitile 255

    Features:

    • High-performance WB epoxy acrylic finish
    • Good chemical resistance
    • Resists repeated cleaning
    • Tile-like finish for ease of cleaning
    • Low odor, low VOC
    • Fast dry to touch and recoat
    • Yellowing resistant finish
    • Suitable for use in USDA inspected facilities

    Description:

    A water-based epoxy acrylic finish that is easy to apply, has an attractive gloss appearance, and has good chemical resistance. It is used primarily in more light to moderate exposures on walls and structural components.


  • Sanitile 500

    Features:

    • Low odor
    • Fast drying
    • Very low VOC
    • Excellent moisture resistance
    • Excellent application properties
    • No fire hazard

    Description:

    A heavy-duty, two-component, water-based, epoxy block filler/sealer that is designed to fill and seal concrete masonry units and other concrete surfaces. It provides a stronger base-coat than standard acrylic block fillers for those projects requiring more physical and chemical resistant properties.


  • Sanitile 555 VOC

    Features:

    • Very good chemical resistance
    • Resists repeated cleaning
    • Gloss finish for ease of cleaning
    • Low odor, VOC is <100 g/L
    • Fast dry to touch and recoat
    • Hard, tough, abrasion resistant film
    • Suitable for use in USDA inspected facilities
    • Breathable for concrete with high moisture vapor transmission, when used as part of an all waterbased system

    Description:

    A water-based epoxy finish that is easy to apply and has very good chemical resistance. Sanitile 555 VOC has minimal odor and is less than 100 g/L VOC. It has significant improvements in film hardness and toughness over straight acrylic or acrylic-epoxy coatings and is more chemically and physically resistant. It is therefore ideal for more aggressive exposures on walls and structural components than acrylic-modified epoxies. It may also be used for light to moderate duty floors.


  • Sanitile 600

    Features:

    • Very good abrasion resistance
    • Very good flexibility and impact resistance
    • Recommended for concrete or other surfaces
    • Excellent for filling and sealing concrete and concrete masonry units
    • Suitable for use in USDA inspected facilities

    Description:

    A high build epoxy coating for sealing and filling porous and irregular cementitious surfaces. Particularly recommended for walls in critical areas of institutional, pharmaceutical, and food processing plants where concrete surfaces must be prepared for ease of cleaning and surface decontamination. It is recommended as a primer on concrete under Sanitile and other Carboline topcoats. Not recommended for immersion service without recommended topcoats.


  • Sanitile 600 TG

    Features:

    • Very good abrasion resistance
    • Very good flexibility and impact resistance
    • Recommended for concrete or other surfaces
    • Excellent for filling and sealing concrete and concrete masonry units
    • Suitable for use in USDA inspected facilities

    Description:

    A high build epoxy coating for sealing and filling porous and irregular cementitious surfaces. Particularly recommended for walls in critical areas of institutional, pharmaceutical, and food processing plants where concrete surfaces must be prepared for ease of cleaning and surface decontamination. It is recommended as a primer on concrete under Sanitile and other Carboline topcoats. Not recommended for immersion service without recommended topcoats. Trowel grade (TG) version available.


  • Sanitile 845

    Features:

    • Extremely low out-gassing properties for clean room applications
    • Excellent physical properties and chemical resistance
    • High build
    • High solids formulation allows for improved edge protection
    • VOC compliant to 100 g/l VOC regulations

    Description:

    High solids, high build, satin finish that was specifically designed to have very low out-gassing properties making it ideal for clean room applications. It provides a tough attractive finish while exhibiting outstanding performance properties. Demonstrates extremely good resistance to abrasion, corrosion and chemical exposure when applied over recommended Carboline primers and/or intermediate coats.


  • Sanitile 855

    Features:

    • Versatile multi-purpose coating
    • Tough, high gloss finish
    • Excellent application properties
    • VOC-compliant for most areas
    • Tough, chemical resistant film
    • Excellent color stability
    • Suitable for use in USDA inspected facilities

    Description:

    A high performance finish that provides a durable, impermeable, and easily sanitized surface. This polyester- polyurethane is fortified for film toughness, quick-dry properties, and outstanding color stability. Used to provide the best overall protection for a combination of aggressive chemicals/ cleaning, abrasion and impact resistance, and color stability.


  • Sanitile 944 SL

    Features:

    • High gloss finish
    • Good chemical resistance
    • Suitable for use in USDA inspected facilities
    • Very good abrasion resistance
    • Direct-to-concrete capability

    Description:

    Epoxy floor coating for use on metal and concrete surfaces. Provides durable floor finish with good resistance to common chemicals and daily forklift traffic. Provides an cost effective solution to floor coating needs.


  • Sanitile 945 SL

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    Sanitile 945 SL is a 100% solids, high performance, epoxy coating designed for concrete. Sanitile 945 SL is a self-leveling coating which may be applied as a neat, aggregate filled and/or reinforced coating system. Sanitile 945 SL is acceptable for use in USDA inspected facilities and is specially formulated to withstand some of industry’s most aggressive chemicals.


  • Sealer 985 (fka Carboseal 985)

    Features:

    • Quick return to service (2-4 hours for foot traffic)
    • Self-leveling
    • Smooth, gloss finish
    • Flexible with high impact resistance
    • Excellent UV protection
    • Excellent chemical and abrasion resistance
    • Extended pot-life or working time
    • 95% volume solids, low VOC, low odor
    • Suitable for use in USDA inspected facilities
    • Available in custom colors
    • Class A fire rating per ASTM E84

    Description:

    This high-solids, polyaspartic was developed with excellent chemical resistance, adhesion, and resistance to UV degradation for floor coating applications. it is very low VOC and virtually odor free.


  • Semstone 110

    Features:

    • Outstanding wetting properties
    • Solvent-free
    • Long working time
    • Excellent adhesion
    • Compatible with a variety of toppings

    Description:

    Two part epoxy exhibiting superior adhesion to concrete and steel. Used primarily as a primer/sealer for concrete surfaces and top coated with a variety of chemically resistant toppings.


  • Semstone 140

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding properties
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    High performance lining system designed for concrete. Semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals.


  • Semstone 140 CT

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    Semstone 140 CT is a 100% solids, high performance, epoxy lining system designed for concrete. It is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 140 CT is specially formulated to withstand some of industry’s most aggressive chemicals.


  • Semstone 140 SL

    Features:

    • Semstone 140SL is a two-component system that possesses the following characteristics:
    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    Semstone 140SL is a 100% solids, high performance, epoxy coating designed for concrete. Semstone 140SL is a self-leveling coating which may be applied as a neat, aggregate filled and/or reinforced coating system. Semstone 140SL is specially formulated to withstand some of industry’s most aggressive chemicals.


  • Semstone 145

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior acid resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating and may be applied as an aggregate filled and/or reinforced coating system. Specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.


  • Semstone 145 CT

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor
    • Formulated to resist a variety of chemical solutions.
    • Suitable for use in USDA-inspected facilities

    Description:

    Semstone 145 CT is a 100% solids, high performance, novolac epoxy lining system designed for concrete. It is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 145 CT is specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents.


  • Semstone 145 SL

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior adhesion to both steel or concrete
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    Semstone 145 SL is a 100% solids, high performance, novolac epoxy coating designed for concrete. Semstone 145 SL is a self-leveling coating which may be applied as a neat, aggregate filled and/or reinforced coating system. Semstone 145 SL is specially formulated to withstand some of the industry's most aggressive chemicals, including 98% sulfuric acid as well as many organic chemicals and solvents.


  • Semstone 245

    Features:

    • Excellent resistance to chemical attack
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor
    • Formulated to resist a variety of chemical solutions.

    Description:

    Semstone 245 is a 100% solids, high performance, novolac epoxy lining system designed for concrete. Semstone 245 is a semileveling coating, it may be applied as an aggregate filled and/or reinforced coating system. Semstone 245 is specially formulated to withstand some of the industry's most aggressive chemicals, including chlorinated solvents.


  • Semstone 305

    Features:

    • Easy to apply
    • Nonflammable
    • Low odor
    • Castable
    • Make excellent materials of construction

    Description:

    Semstone 305 polymer concrete is an excellent alternatives to acid brick. It is used to protect Portland cement concrete from attack from a wide range of aggressive chemicals. Semstone 305 polymer concrete can be applied from 1/2” (12.7 mm) to several inches thick. Applied by screed and trowel method, their installation is quick and easy. Semstone 305 provides a monolithic surfacing that has excellent resistance to impact and mechanical abuse and can be used to restore and protect degraded surfaces in a single application.


  • Semstone 6325 Sealant

    Features:

    • Long term abrasion and chemical resistance
    • Excellent bond strength assures good adhesion
    • Pourable viscosity allows easy installation to horizontal surfaces
    • Retains physical properties over a wide temperature range, -20 to 150°F (-29 to 66°C)
    • Factory proportioned packaging ensures consistent high quality and simplified mixing
    • Compatible with all Carboline lining systems

    Description:

    Two-component, self-leveling, polyurethane sealant. It exhibits excellent flexibility with moderate hardness and good chemical resistance to organic acids, alkalis and most solvents. Uses: can be used in conjunction with all lining systems in a wide range of applications. All high movement joints: isolation, expansion or control Thermal shock situations Exterior applications


  • Semstone 805

    Features:

    • Highly Flexible
    • Chemical Resistant
    • Water Resistant
    • Abrasion Resistant
    • 100% Solids

    Description:

    Semstone 805 is a flexible epoxy polymer coating and lining providing a chemical, water and abrasion resistant barrier for steel and concrete. This versatile coating system was developed as a self-leveling, flexible chemical resistant coating and lining and can also be used as a high build coating and lining system with the addition of a third component. Semstone 805 is a 100% solids, low odor, two-component system applied either as a neat system (unfilled), a reinforced system, an aggregate-filled system or as an aggregate filled reinforced system. A bagged Part C thixotropic agent is added for high build applications. It is most often used with reinforcing fabric (#100) over expansion joints.


  • Semstone 806

    Features:

    • Flexible
    • Abrasion Resistant
    • Chemical Resistant
    • Waterproof

    Description:

    Semstone 806 is a 100% solids, low odor, rubberized epoxy. It is used as a chemically resistant membrane for concrete. When reinforced with our flexible fabrics it provides a system which will bridge working cracks as well as expansion joints. When reinforced with Semstone 100 fabric, it can bridge crack expansion joint movement up to 1/2” without cracking. This product is a self-leveling material. However, it maybe used as a high build coating system by the addition of a third component, Semstone Thixotrope D, which is a non-silica Thixotrope. When using reinforcing fabric, Thixotrope D is not required. Concrete slabs with severe cracking problems, as well as all construction and expansion joints, may be treated using Semstone 806 with #100 Fabric. This ideal ideal for use as a secondary containment membrane.


  • Semstone 870

    Features:

    • Excellent resistance to chemical attack
    • Built from flexible vinyl ester binders
    • Excellent abrasion and impact resistance
    • Exceptional thermal shock resistance
    • Superior bonding qualities
    • High cohesive strength
    • Low permeability
    • Low odor

    Description:

    Semstone 870 is a high performance, vinyl ester lining system designed for concrete. Semstone 870 is formulated to be more flexible than typical vinyl esters to tolerate more concrete movement. It is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 870 is specially formulated to withstand some of industry’s most aggressive chemicals, including a broad range of organic chemicals.


  • Semstone 884

    Features:

    • Excellent alternative to acid brick

    Description:

    Semstone 884 is a vinyl ester polymer concrete which incorporates proprietary non-shrink technology into its formulation, making it the first practical vinyl ester polymer concrete for use as a concrete topping. It is recommended for use in concentrated nitric acid service and other strong oxidizers. Semstone 884 is an excellent alternative to acid brick. It is also used as a construction material for pouring pump foundations and small tank foundations. It can be used for pre-casting of sumps and trenches.


  • Semstone Fabric 100

    Features:

    Description:

    Semstone Fabric 100 is a non-woven geotextile made from polypropylene fibers. The polypropylene fibers are essentially chemically and biologically inert which offers good chemical resistance to acids, alkalis, oils and most solvents. When saturated with either SEMSTONE 805 or SEMSTONE 806 the result is a chemically resistant, flexible, reinforced membrane system well suited for sealing expansion joints or bridging working cracks in concrete.


  • Semstone Thixotrope C

    Features:

    Description:

    Cellulose powder (crushed newspaper) for adding body to Semstone products


  • Semstone Thixotrope D

    Features:

    Description:

    Cabosil for film build properties for Semstone products


  • SOUTHWEST TYPE 5AR

    Features:

    • Extended set time - up to 4 days
    • Labor and material savings
    • Reduced clean up and start up times
    • Increased production
    • Accelerator A-20 injection is required for final set
    • Styrene free - no toxic decomposition gases
    • Economical - maintains project on budget
    • Multiple UL Designs - can be used with all Southwest Type 5GP and Southwest Type 5MD designs

    Description:

    This is an extended set, spray applied fire resistive material that can be left in the equipment and lines for up to 4 days without setting. It was developed to be used as a holding material to leave in the equipment and lines to reduce start up and clean up times when using the Southwest Type 5 materials. This material requires injection with Accelerator A-20 to reach final set. It is intended for use with Southwest Type 5GP and Southwest Type 5MD for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units.


  • SOUTHWEST TYPE 5GP

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – compliant with EPA and OSHA
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases
    • Economical – Maintains project on budget
    • Design flexibility with over 100 UL/cUL designs

    Description:

    A 15 lb./ft³ (240 kg/m³) SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5GP is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 5MD

    Features:

    • Durable cementitious formulation
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set and increased yield (optional)
    • Asbestos-free – compliant with EPA and OSHA
    • Mineral Wool free – no airborne fibers
    • Styrene free – no toxic decomposition gases
    • Design flexibility with over 100 UL/cUL designs

    Description:

    A medium density SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. Southwest Type 5MD is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 7GP

    Features:

    • Damage resistant and permanent
    • Noncombustible
    • Can be injected with Accelerator A-20 for fast set (optional)
    • Moisture resistant
    • Asbestos-free – complies with EPA and OSHA regulations
    • Mineral Wool free – no airborne fibers
    • Styrene free – no toxic decomposition gases
    • Economical – Maintains project on budget
    • Design flexibility with over 100 UL/cUL designs

    Description:

    A 22 lb./ft³ (352 kg/m³) density (average) SFRM intended for the fire protection of structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. It was specifically formulated for either unconditioned or conditioned areas such as mechanical rooms, elevator shafts and parking garages. Southwest Type 7GP is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 7HD

    Features:

    • Damage resistant and permanent
    • Noncombustible
    • Moisture resistant
    • Asbestos-free – complies with EPA and OSHA regulations
    • Mineral Wool free – no airborne fibers
    • Styrene free – no toxic decomposition gases
    • Economical – Maintains project on budget
    • Design flexibility with over 100 UL/cUL designs

    Description:

    A 40 lb./ft³ (640 kg/m³) density (average) SFRM intended for the fire protection of structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours. It was specifically formulated for high humidity areas such as mechanical rooms, elevator shafts and parking garages and is resistant to damage and moisture. Southwest Type 7HD is a trademark of the Southwest Fireproofing Products Company.


  • SOUTHWEST TYPE 7TB

    Features:

    • 15 minute thermal barrier protection
    • Damage resistant and permanent
    • Noncombustible
    • High build
    • Moisture resistant
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.
    • Economical – Maintains project on budget.

    Description:

    A 22 lb./ft³ (352 kg/m³) density (average) SFRM designed for use as a thermal barrier fire protection material over foam plastics. A secondary use is for fire protection of steel. It was specifically formulated to resist exposure to high humidity and moisture and for direct application to rigid foam plastic urethane, and polystyrene insulation.


  • SOUTHWEST TYPE DK3

    Features:

    • Excellent bonding properties
    • Fast overcoat time
    • Noncombustible
    • Asbestos-free – complies with EPA and OSHA regulations.
    • Mineral Wool free – no airborne fibers.
    • Styrene free – no toxic decomposition gases.

    Description:

    A cement and vermiculite based, spray applied spatter coat designed to be used in conjunction with Southwest fireproofing materials to enhance bonding properties on cellular steel decking and roof deck systems.


  • Splash Zone A-788

    Features:

    • Designed for underwater and other wet applications
    • Can be applied up to 2" in thickness
    • Self-priming on most surfaces and over most generic types of coatings
    • Rapid cure characteristics
    • VOC compliant to current AIM regulations

    Description:

    Solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.


  • Surface Cleaner 3

    Features:

    • Minimum Toxicity - Waterborne
    • Biodegradable

    Description:

    Cleaning agent used for degreasing and cleaning contaminated surfaces prior to painting. This product is biodegradable and can be used on both painted and unpainted surfaces.


  • TC-55 SEALER

    Features:

    • Easy spray application
    • Excellent bonding properties
    • Single package
    • Mixed with clean potable water at job site

    Description:

    TC-55 Sealer may be used as an adhesive and/or sealer with cementitious sprayed fire resistive materials and insulation products. TC-55 Sealer improves adhesive bond of fireproofing and insulation products to steel, concrete and other substrates. When applied as a topcoat/sealer, it improves most physical characteristics, reduces air erosion losses and may be used to color the fireproofing or insulation surface.


  • Thermaline 2977 VOC

    Features:

    • VOC compliant to 340 g/l
    • Tolerant of power tool cleaned surfaces
    • Zinc filler provides excellent corrosion and undercuttung resistance
    • May be applied over hot substrates up to 150°F (65°C)
    • Will air dry “tack free” at ambient but will remain soft until heat curing has been achieved
    • Typically topcoated with a silicone or modified silicone finish

    Description:

    A zinc-filled, high temperature resistant primer for the protection of steel substrates at elevated temperatures up to 800°F (426°C). Excellent for use as both a new construction or maintenance primer for high heat steel surfaces. Suitable for use in any process industry where hot surfaces need corrosion protection.


  • Thermaline 4000

    Features:

    • Inorganic; stable; inert polymer
    • Outstanding durability
    • Excellent corrosion protection (used over Carbozinc inorganic primers)
    • High temperature resistance (800 °F [426 °C])
    • VOC compliant
    • Cures at ambient conditions (hard in 2 hours)
    • Cures down to 40 °F (4 °C)
    • Does not require heat cure for high-temp service
    • Outstanding resistance to handling damage
    • Single-package

    Description:

    Thermaline 4000 is a high heat polymer coating used for the protection of equipment operating at elevated temperatures. It is typically used over Carbozinc® inorganic zinc primers for outstanding corrosion protection and heat resistance. The combination of the zinc primer with this finish provides exceptional performance in durability. Unlike most high temperature silicone-based technologies with soft films, Thermaline 4000 does not require a heat cure for film forming properties. It cures hard rapidly under ambient conditions (humidity greater than 30%).


  • Thermaline 450 EP

    Features:

    • Versatile use from cryogenic to 400°F (204°C) exposures
    • Very good flexibility
    • Excellent overall chemical resistance
    • Very good abrasion resistance
    • Easily applied by spray
    • Acceptable for use over stainless steels
    • High solids, low VOC formula

    Description:

    A high performance immersion-grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures. It is typically used on hot steel substrates under insulation operating continuously up to 400°F, 204°C. It has excellent chemical resistance properties to handle the corrosive effects of wet insulation under thermal cycling conditions. This coating is recommended for NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI) system numbers CS-1, CS-3, CS-4, SS-1, SS-2, and SS-3.


  • Thermaline 4700

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.


  • Thermaline 4700 Aluminum

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)
    • Approved MPI #22

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.


  • Thermaline 4700 VOC

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)
    • VOC compliant

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected.


  • Thermaline 4700 VOC Aluminum

    Features:

    • Resistant to severe thermal shock
    • Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
    • Provides barrier protection prior to heat curing (full film physical properties occur after heat curing)
    • VOC compliant
    • Approved MPI #22

    Description:

    High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1004°F (204°C-540°C) Color stability at maximum temperature will depend on color selected. .


  • Thermaline 4765

    Features:

    • Zinc rich formulation provides outstanding corrosion resistance
    • Air dries to touch at ambient temperatures
    • Is resistant to severe thermal shock
    • Provides outstanding long-term performance and appearance when topcoated with Thermaline Silicone Finishes

    Description:

    Corrosion resistant primer used over carbon steel in areas exposed to extreme temperatures. Suitable for service from 400°F - 1200°F. Thermaline 4765 may be used in high temperature service under insulation when top coated with Thermaline 4700.


  • Thermaline 4900

    Features:

    • 450°F (232°C) Temperature resistance
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering and color stability

    Description:

    Air-dried coating available in colors and suitable for 450°F (232°C) high temperature exposures. Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is recommended and will impart added strength and integrity to the coating.


  • Thermaline 4900 Aluminum

    Features:

    • Temperature resistance up to 525°F (273°C)
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering and color stability

    Description:

    Air-dried coating available in colors and suitable for high temperature exposures up to 525°F (273°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is recommended and will impart added strength and integrity to the coating.


  • Thermaline 4900 VOC

    Features:

    • Temperature resistance up to 500°F (260°C)
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering and color stability
    • VOC compliant
    • RTS colors available

    Description:

    Air-dried coating available in colors and suitable for high temperature exposures up to 500°F (260°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is acceptable and will impart added strength and integrity to the coating.


  • Thermaline 4900 VOC Aluminum

    Features:

    • Temperature resistance up to 525°F (273°C)
    • Single-coat application
    • Excellent resistance to thermal shock
    • Good weathering
    • VOC compliant

    Description:

    Air-dried coating suitable for high temperature exposures up to 525°F (273°C). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 300°F (149°C) is acceptable and will impart added strength and integrity to the coating.


  • Thermaline Heat Shield

    Features:

    • Unique reinforced but flexible polymer film
    • Versatile use from cryogenic to 1200°F (650°C) exposures
    • Dries to handle without heat cure (See curing schedule)
    • Outstanding barrier properties
    • Protects steel from thermal wet cyclic conditions
    • Suitable for both shop and field application
    • Provides corrosion protection even with ambient temperature cure
    • Meets ISO 12944-6 C5-M Medium
    • Self priming or apply over Carbozinc 11 primers when uninsulated
    • Protects stainless steels from chlorides and stress corrosion cracking
    • Very fast recoat times

    Description:

    This is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 1200°F. It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).


  • Thermo-Lag 220

    Features:

    • Class A fire hazard classification from ASTM E84 testing at Underwriter's Laboratories, Inc.
    • Durable finish - provides a hard, durable finish resistant to normal wear
    • Thin film coating
    • VOC compliant
    • Easy repair - if damaged, it can be repaired easily using a brush or roller

    Description:

    Thermo-Lag® 220 is designed to limit the spread of flame across interior wood substrates.


  • Thermo-Lag 270

    Features:

    • Flexible
    • Hard, dust free surface
    • Allows easy replacement of cables
    • Water-based product, low odor
    • Asbestos-Free – complies with EPA and OSHA regulations
    • Factory Mutual – tested and approved
    • Does not de-rate cables
    • Weathering – approved for exterior use
    • Quality Manufactured – under strict Carboline quality standards
    • Provides protection at 1/16” Dry Film Thickness

    Description:

    A water based mastic that can be applied to electrical cables to retard fire propagation. Once applied, it meets code and insurance requirements for interior and exterior use. It provides a hard and flexible surface that will not dust, flake, or spall.


  • Thermo-Lag 3000-P

    Features:

    • Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
    • Lowest thickness per fire rating of any competitive epoxy intumescent coating.
    • Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
    • Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
    • Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.
    • Extensive outgas testing for controlled cleanroom and sterile environments.

    Description:

    Thermo-Lag 3000-P is a flexible, two-component epoxy Intumescent Fireproofing coating designed to provide asset integrity from the damaging effects of hydrocarbon fires. Since 1999 Thermo-Lag 3000-P has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities. Thermo-Lag 3000-P has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).


  • Thermo-Lag 3000-SP

    Features:

    • Provides a flexible fire protection solution to structural steelwork, process vessels, divisions and electrical raceways for 1 through 4 hours.
    • Lowest thickness per fire rating of any competitive epoxy intumescent coating.
    • Inherently flexible and durable formulation designed to withstand abrasion, vibration, handling, transportation and erection stresses in any climate.
    • Formulated to maintain it’s flexibility, elongation and fire resistive properties throughout its service life regardless of climate.
    • Engineered to resist extreme and rapid temperature cycles without cracking or disbondment.
    • Extensive outgas testing for controlled cleanroom and sterile environments.

    Description:

    Thermo-Lag 3000-SP is a flexible, two-component epoxy Intumescent Fireproofing coating designed to provide asset integrity from the damaging effects of hydrocarbon fires. Since 1999 Thermo-Lag 3000-SP has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities. Thermo-Lag 3000-SP has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).


  • Thermo-Lag E100

    Features:

    • Certified to UL 263 / ASTM E119 / NFPA 251
    • Exterior and interior rated
    • High quality aesthetic finish
    • Does not require reinforcing mesh
    • Low thickness requirements
    • High build, fast recoat
    • Saves application time, lowering installation cost
    • Rugged durable material suitable for onsite or offsite applications
    • LEED compliant, low VOC
    • Extensive outgas testing for controlled cleanroom and sterile environments

    Description:

    An epoxy intumescent fireproofing for commercial and light industrial applications. It was specifically designed with an advanced formulation to provide 1-3 hour cellulosic fire protection for structural steel beams, I-section columns, tubular columns and pipes without the need for reinforcing mesh. It provides a fast curing, aesthetically pleasing fire protection solution and is rated for both exterior and interior applications.


  • Thermo-Lag E100 S

    Features:

    • Certified to UL 263 / ASTM E119 / NFPA 251
    • Exterior and interior rated
    • High quality aesthetic finish
    • Does not require reinforcing mesh
    • Low thickness requirements
    • High build, fast recoat
    • Saves application time, lowering installation cost
    • Rugged durable material suitable for onsite or offsite applications
    • LEED compliant, low VOC
    • Extensive outgas testing for controlled cleanroom and sterile environments

    Description:

    An epoxy intumescent fireproofing for commercial and light industrial applications. It was specifically designed with an advanced formulation to provide 1-3 hour cellulosic fire protection for structural steel beams, I-section columns, tubular columns and pipes without the need for reinforcing mesh. It provides a fast curing, aesthetically pleasing fire protection solution and is rated for both exterior and interior applications.


  • Thermo-Sorb VOC

    Features:

    • UL/ULC listed – designs for many types of steel sections. Up to 3 hour fire ratings for both interior general purpose and interior conditioned space applications.
    • Decorative finish – provides a slightly textured, decorative finish.
    • Durable finish – provides a hard dust free surface resistant to normal wear.
    • VOC compliant
    • LEED compliant
    • Chemical resistant in EV Assembly, EV Battery, and Computer Chip Plants.
    • Extensive outgas testing for controlled cleanroom and sterile environments.

    Description:

    A decorative thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes.


  • Thinner 10

    Features:

    Description:


  • Thinner 15

    Features:

    Description:


  • Thinner 2

    Features:

    Description:


  • Thinner 21

    Features:

    Description:


  • Thinner 213

    Features:

    Description:


  • Thinner 214

    Features:

    Description:


  • Thinner 215

    Features:

    Description:


  • Thinner 231

    Features:

    Description:


  • Thinner 234

    Features:

    Description:


  • Thinner 235

    Features:

    Description:


  • Thinner 236 E

    Features:

    Description:


  • Thinner 25

    Features:

    Description:


  • Thinner 26

    Features:

    Description:


  • Thinner 33

    Features:

    Description:


  • Thinner 45

    Features:

    Description:


  • Thinner 72

    Features:

    Description:


  • Thinner 76

    Features:

    Description:


  • Urethane Converter 811

    Features:

    • Excellent weatherability
    • Excellent flexibility
    • Excellent abrasion resistance
    • Meets most VOC (Volatile Organic Content) requirements

    Description:

    Carbothane 834 (also known as Carbothane 134 HP), is an attractive, high gloss, high solids urethane topcoat which is easily applied by airless or conventional spray to yield a hard, very cleanable surface. It exhibits excellent flow and leveling properties to minimize dry spray and lampmarks.


  • Zinc Filler Type II

    Features:

    • Used in many Carbozinc primers
    • Meets the requirements of ASTM D520 Type II
    • Maximum lead content is 0.01% (100 ppm)

    Description: